- Home
- digitmakers.ca
digitmakers.ca
Aluminium Spacer
$1.00
Aluminum spacers for mounting hardware to aluminum extrusions. ID: 5.1mm OD: 10mm Aluminum Length: various available
Aluminum GT2 Timing Idler - 6 mm belt - 20 Tooth - 5mm Bore
$3.00
GT2 aluminum timing pulley Inner diameter: 5mm Outer diameter: Approx. 18mm Height: approx. 8mm Teeth: 20 Tooth diameter: 12.3mm Tooth width: 11mm Package contents: 1 GT2 aluminum timing pulley with 20 teeth
Aluminum GT2 Timing Pulley - 10 mm belt - 20 Tooth - 5mm Bore - 2 Grub Screws
$4.00
GT2 aluminum timing pulley with grub screws Inner diameter: 5mm Outer diameter: Approx. 16mm Height: approx. 19mm Teeth: 20 Tooth diameter: 12.3mm Tooth width: 11mm Package contents: 1 GT2 aluminum timing pulley with 20 teeth and 2 grub screws.
Aluminum GT2 Timing Pulley - 6mm Belt - 16 Tooth - 5mm Bore
$3.00
GT2 aluminum timing pulley. Inner diameter: 5mm Outer diameter: 13mm Height: 14mm Teeth: 16 Tooth diameter: 9.5mm Tooth width: 7.3mm Package contents: 1 GT2 aluminum timing pulley with 16 teeth.
BigTreeTech TMC2209 V1.2 Stepper Motor Driver
$8.00
Product Name: BIGTREETECH (BTT) TMC2209 V1.2 Item Type: Stepper Motor Driver Current: 2.0 Motor Voltage: 5.5...28V Logic Voltage: 3.3...5V Coil Current: 2.8A Peak Interface: Step/DIR /UART Extra Function: CoolStep and stallGuard
BlueCast X-FILIGREE V2
$126.00
X-Filigree® V2 improved the performance of the previous version. The new resin has been improved to meet the needs of Middle Eastern designers. Thanks to the waxy polymer it ensures perfect printing properties with sharp details, excellent dimensional stability in time without shrinkage . X-filigree® V2 was developed by BLueCast R&D in order...
Bondtech BMG Extruder For Mosquito Hotend RH & LH
$76.00
Please choose from the Standard (RH) or Left-hand (mirrored) The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive technology you can expect problem free material feeding. This extruder is optimized for the Mosquito / Mosquito Magnum hotends with and integr...
Bondtech Brass Motor Gear
$7.00
Hardened and precision ground shaft for the Bondtech gear kits.
Bondtech CHT Volcano Coated Brass Nozzle - Various Sizes
$24.00
These are nozzles for high flow applications Increase the Max Volumetric Flow of your Volcano heat block by 50% They are manufactured by Bondtech in-house,and will fit the following blocks/printers: E3D Volcano blocks Other Volcano type blocks Artillery Sidewinder X1 and X2 Anycubic Vyper FLSUN Super Racer Artillery Genius Pro Anycubic Kobra a...
Bondtech CHT® Coated Brass Nozzle for E3D & Slice Engineering Hotends - Various Sizes
Parts
Bondtech CHT® Coated Brass Nozzle for E3D & Slice Engineering Hotends - Various Sizes
$19.00
Manufactured for High Flow Applications Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75mm or 2.85mm hotends. A...
Bondtech CHT® MK8 Coated Brass Nozzle - Various Sizes
$19.00
Manufactured for High Flow Applications Main Bondtech CHT® Advantages Higher melt capacity by increasing the surface area of the heating walls Affordable price Machined with ultra-precision Brass nozzle with Nickel coated surface Follows nozzle standards: RepRap (M6×1×7.5×12.5) MK8 (M6×1×5×13) May be used with 1.75mm or 2.85mm hotends. Ad...
Cardboard Spool Ring - Random Color
$2.00
This is a sleeve for the filaments to make it compatible with the Bambu Lab AMS. Compatible with: Filaments Depot and D3D Sigma cardboard spools You can also print your own rings and customize it based on your needs. Download the STL here: Left Sleeve Right Sleeve
colorFabb ASA Natural 1.75mm - 650g
$14.00
ASA Natural When you don’t add any colors to the ASA raw material, this is how it looks. Slightly off white, but really nice color for technical parts and the perfect start of a project if you need to finish it with paint. The two most important features of ASA are its inherent UV stability and high temperature resistance of 96C. This material...
colorFabb LW PLA - 1.75mm 750g (Various Colors)
$19.00
colorFabb LW-PLA Light weight PLA (LW-PLA) is the best filament for printing RC Planes, Cosplay and other light weight items. Parts are feather light, yet retain good strength and are easy to cut, trim and sand. If part weight matters to you, then this is your filament of choice. Pros Reduce the weight of printed parts up to 65% compared to re...
colorFabb LW-ASA Natural 1.75mm - 650g
$14.00
Light Weight ASA This is colorFabb's most basic LW-ASA, no colorants added just the pure slightly off white ASA color. When foamed the surface finish is matte. The LW-ASA material is capable of increasing its volume nearly 2.5 times. The filament density is close to 1.07 g/cm3 but when foamed at its maximum capacity users will achieve part densi...
colorFabb Tough PLA - 1.75mm 750g (Various Colors)
$19.00
colorFabb Tough PLA ColorFabb Tough PLA 3D printing filament features a better balance between material toughness and ease of 3D printing. The new formulation increases impact strength with 70% while retaining most of it’s tensile strength. Tough PLA can be printed at slightly higher temperatures then regular PLA for improved performance and e...
colorFabb Varioshore TPU - 1.75mm 700g (Various Colors)
$28.00
ColorFabb VarioShore TPU Varioshore TPU has a few main distinctive features: its variable shore hardness, reduced weight and density and soft touch. VarioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layer height). At temperatures between 200 and 250C the materials will s...
colorFabb XT CF20 1.75mm 750G - Black
$30.00
Based on colorFabb_XT, XT-CF20 is a carbon fiber composite material. Loaded with no less than 20% specially sourced carbon fibers we have developed a very stiff and tough 3D printing filament made for functional parts. It is truly a professional printers go-to material, especially for users looking for high melt strength, high melt viscosity a...
colorFabb XT Co-Polyester - 1.75mm 750g (Various Colors)
$17.00
The colorFabb_XT co-polyester range is made with Eastman Amphora™ 3D polymer and has a unique formulation for 3D printing applications. The excellent properties entail high strength, high toughness, high glass transition temperatures, and thus improved thermal resistance. SPECIFICATION Material: colorFabb_XT CO-POLYESTER Diameter Toler...
CRAFTBOT PLUS / PRO PCB - HMI V3.1T
CRAFTBOT PLUS / PRO PCB - HMI V3.1T
$105.00
Version 3.0 LCD panel for the CraftBot PLUS 3D printer.
D3D Matte Gradient PLA+ Refill - Bambu Lab Spool Compatible - 1.75mm 1kg - Various Colors
3D Printing Filaments
D3D Matte Gradient PLA+ Refill - Bambu Lab Spool Compatible - 1.75mm 1kg - Various Colors
$19.00
D3D Matte Gradient PLA+ BAMBU LAB AMS COMPATIBLE SPOOLS D3D Gradient PLA+ Refill is a matte two-color gradient 3D Filament, suitable for combined printing of handicrafts, artworks, industrial design samples, and product models with high toughness requirements. PLA+ is 5 times higher than normal PLA. High Precision and Good Toughn...
Flat Ribbon Cable
$1.00
Flat Ribbon Cable for 2.54mm Insulation Displacement Connectors (IDC) Pricing is for 1 meter grey flat ribbon cable Wire: 28 AWG Maximum Voltage: 300 V Pitch: 0.05" (1.27 mm) Style: UL 2651