{"id":8298215047366,"title":"ESun EBox Lite Filament Smart Storage \u0026 Dryer","handle":"esun-ebox-lite-filament-smart-storage-dryer","description":"\u003cp\u003e\u003cspan\u003eThe eBOX Lite is a cost-effective storage box with constant temperature and humidity, moisture-proof and dust-proof and heating function specially developed by eSUN for 3D printing filaments. Compared with the old eBOX, eBOX Lite removes the weighing function and improves the cost performance; the upper cover is made of transparent material, which helps to observe the remaining of filaments in real time; the curved heating plate and the sheet metal heat conduction plate design make the heat more uniform and easier to maintain constant temperature and humidity; heat insulation and flame retardant insulation cotton are placed on both sides of the interior, which are safe and anti-scald, and also have the function of heat preservation; the fan adopts a long-life and low-noise turbo fan, which has good effect and low noise; it also has wide compatibility with most of the 0.5\/1KG, 1.75\/2.85mm filaments on the market such as PLA, ABS, PETG, PVA, ePA, ePA-CF, ePA-GF, PC, TPU-95A, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct properties\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStore filaments at any time to prevent moisture and dust.\u003c\/li\u003e\n\u003cli\u003eTransparent material, real-time observation of filament usage.\u003c\/li\u003e\n\u003cli\u003eUniform heat, the arc heating piece and the sheet metal heat conduction piece are easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003eHigh safety, heat insulation and flame retardant insulation cotton are placed on both sides to prevent scalding.\u003c\/li\u003e\n\u003cli\u003eWide compatibility, compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003eLow noise, using long-life and low-noise turbofan.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed box\u003c\/strong\u003e: Store filaments, moisture-proof and dust-proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop cover PC material\u003c\/strong\u003e: Real-time observation of filaments usage, durable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc heating film\u003c\/strong\u003e: Heat evenly, making it easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved sheet metal thermal conductive sheet\u003c\/strong\u003e: The temperature rises quickly and is more uniform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge chamber\u003c\/strong\u003e: Compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation cotton\u003c\/strong\u003e: High safety, anti-scald.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-life, low-noise turbofan\u003c\/strong\u003e: Low noise, even hot air flow in the cavity, durable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConnect the adapter to AC100-240V~50\/60Hz power supply, and insert the output end into the rear interface of the box.\u003c\/li\u003e\n\u003cli\u003ePress the power button to turn on.\u003c\/li\u003e\n\u003cli\u003eOpen the upper cover, put the desiccant into the empty slot at the end of the box, and put the filament spool in.\u003c\/li\u003e\n\u003cli\u003eAfter putting in the filament spool, pull the filament out from the outlet and close the upper cover. (The pulling direction of the filament can be from bottom to top, or top to bottom, adjusted according to different positions of the printer).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cstrong\u003eParameter Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThe product has a total of 4 buttons, which are on-off key\u003c\/span\u003e\u003cspan\u003e, \"M\" function key\u003c\/span\u003e\u003cspan\u003e, up key\u003c\/span\u003e\u003cspan\u003e and down key\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTwo modes: temperature setting mode \u003cstrong\u003eTEMP\u003c\/strong\u003e, heating time setting \u003cstrong\u003eTIME\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress \"M\" \u003c\/span\u003e\u003cspan\u003eto switch the function cyclically, and adjust the parameters with \u003c\/span\u003e\u003cspan\u003etwo directional keys.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBy default, the system enters sleep after 5 seconds of inactivity, and the backlight disappears in sleep mode. Press any key to wake up, and then press the power button to shut down after wakeup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDescription of Temperature Setting Mode\u003c\/h3\u003e\n\u003cp\u003ePress the function key \"M\" three times to switch to the temperature setting mode after power on. The screen will display TEMP. There are 3 levels in total, adjusted by the up or down key; the larger the number, the higher the temperature, and when it displays \"0\", it means no heating.\u003c\/p\u003e\n\u003cp\u003eRefer to the table below for specific gear setting recommendations. Set the heating temperature to the 3rd level for the highest temperature.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eFilament\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePLA\/PLA+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eABS\/ABS+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp style=\"text-align: center;\" align=\"left\" data-mce-style=\"text-align: center;\"\u003eLevel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set for Temperature \u0026amp; Humidity Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" align=\"left\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eHot plate TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e103℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e116℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e118℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e40℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e50℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e55℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside humidity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e34.2%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e23%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e15%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: The above data is tested under the conditions of indoor temperature 20℃ and humidity 55%. The temperature and humidity in the box will change slightly due to the different use environment.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 align=\"left\"\u003eHeating Time Setting Mode\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter turning on, press the function key \"M\" four times to switch to the heating time setting mode, the screen displays TIME, and the value displayed now is the remaining heating time in hours. \u003c\/li\u003e\n\u003cli\u003eThe value displayed in TIME mode decreases as time advances, similar to a countdown.\u003c\/li\u003e\n\u003cli\u003eIn TIME mode, press the up or down button to set the heating time, and each press will increase\/decrease by half an hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eQuestion\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePossible cause\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eNot enough drying effect\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFilaments have serious water absorption or high-temperature filaments (such as nylon, PEEK and other filaments that need high-temperature drying)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eeBOX Lite only has the function of maintaining constant temperature and humidity during printing. It is not suitable for drying filaments with serious water absorption and high temperature (such as nylon, PEEK and other filaments that need high temperature drying). It is not suitable to promote the drying function.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe screen does not light up, the buttons do not work, do not heat up, and the fan does not work\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDamaged components\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eQuality problems return to the factory for repair or replacement\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2024-10-30T15:31:42-04:00","created_at":"2024-08-19T15:54:45-04:00","vendor":"ESUN","type":"Accessories","tags":["Box","boxing day","dryer","esun ebox lite","Filament","filament dryer","hobby"],"price":5300,"price_min":5300,"price_max":5300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031130435782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ESUN-EBOX-LITE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ESun EBox Lite Filament Smart Storage \u0026 Dryer","public_title":null,"options":["Default Title"],"price":5300,"weight":2000,"compare_at_price":null,"inventory_management":"shopify","barcode":"6922572201521","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/esuneboxlitethumbnail_1976e41b-077d-4e23-9f96-03cdc430f497.png?v=1724286474","\/\/digitmakers.com\/cdn\/shop\/files\/20210519152921483875953_5468b442-a546-460c-ab12-b35da00f63ab.jpg?v=1724286475","\/\/digitmakers.com\/cdn\/shop\/files\/20210519152053686975299_2c34cc17-8f5b-4165-b64c-8ccb8a451b80.jpg?v=1724286475","\/\/digitmakers.com\/cdn\/shop\/files\/20210519152054124459305_d351fb7d-f742-4040-82d3-36173da2c175.jpg?v=1724286475"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/esuneboxlitethumbnail_1976e41b-077d-4e23-9f96-03cdc430f497.png?v=1724286474","options":["Title"],"media":[{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":30368365379782,"position":1,"preview_image":{"aspect_ratio":1.0,"height":633,"width":633,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/esuneboxlitethumbnail_1976e41b-077d-4e23-9f96-03cdc430f497.png?v=1724286474"},"aspect_ratio":1.0,"height":633,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/esuneboxlitethumbnail_1976e41b-077d-4e23-9f96-03cdc430f497.png?v=1724286474","width":633},{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":30368365412550,"position":2,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/20210519152921483875953_5468b442-a546-460c-ab12-b35da00f63ab.jpg?v=1724286475"},"aspect_ratio":1.316,"height":380,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/20210519152921483875953_5468b442-a546-460c-ab12-b35da00f63ab.jpg?v=1724286475","width":500},{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":30368365445318,"position":3,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/20210519152053686975299_2c34cc17-8f5b-4165-b64c-8ccb8a451b80.jpg?v=1724286475"},"aspect_ratio":1.316,"height":380,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/20210519152053686975299_2c34cc17-8f5b-4165-b64c-8ccb8a451b80.jpg?v=1724286475","width":500},{"alt":"ESun EBox Lite Filament Smart Storage \u0026 Dryer - Digitmakers.ca","id":30368365478086,"position":4,"preview_image":{"aspect_ratio":1.316,"height":380,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/20210519152054124459305_d351fb7d-f742-4040-82d3-36173da2c175.jpg?v=1724286475"},"aspect_ratio":1.316,"height":380,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/20210519152054124459305_d351fb7d-f742-4040-82d3-36173da2c175.jpg?v=1724286475","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe eBOX Lite is a cost-effective storage box with constant temperature and humidity, moisture-proof and dust-proof and heating function specially developed by eSUN for 3D printing filaments. Compared with the old eBOX, eBOX Lite removes the weighing function and improves the cost performance; the upper cover is made of transparent material, which helps to observe the remaining of filaments in real time; the curved heating plate and the sheet metal heat conduction plate design make the heat more uniform and easier to maintain constant temperature and humidity; heat insulation and flame retardant insulation cotton are placed on both sides of the interior, which are safe and anti-scald, and also have the function of heat preservation; the fan adopts a long-life and low-noise turbo fan, which has good effect and low noise; it also has wide compatibility with most of the 0.5\/1KG, 1.75\/2.85mm filaments on the market such as PLA, ABS, PETG, PVA, ePA, ePA-CF, ePA-GF, PC, TPU-95A, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eProduct properties\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStore filaments at any time to prevent moisture and dust.\u003c\/li\u003e\n\u003cli\u003eTransparent material, real-time observation of filament usage.\u003c\/li\u003e\n\u003cli\u003eUniform heat, the arc heating piece and the sheet metal heat conduction piece are easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003eHigh safety, heat insulation and flame retardant insulation cotton are placed on both sides to prevent scalding.\u003c\/li\u003e\n\u003cli\u003eWide compatibility, compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003eLow noise, using long-life and low-noise turbofan.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed box\u003c\/strong\u003e: Store filaments, moisture-proof and dust-proof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop cover PC material\u003c\/strong\u003e: Real-time observation of filaments usage, durable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc heating film\u003c\/strong\u003e: Heat evenly, making it easier to maintain constant temperature and humidity in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurved sheet metal thermal conductive sheet\u003c\/strong\u003e: The temperature rises quickly and is more uniform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge chamber\u003c\/strong\u003e: Compatible with most 0.5\/1KG, 1.75\/2.85mm filaments on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation cotton\u003c\/strong\u003e: High safety, anti-scald.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-life, low-noise turbofan\u003c\/strong\u003e: Low noise, even hot air flow in the cavity, durable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConnect the adapter to AC100-240V~50\/60Hz power supply, and insert the output end into the rear interface of the box.\u003c\/li\u003e\n\u003cli\u003ePress the power button to turn on.\u003c\/li\u003e\n\u003cli\u003eOpen the upper cover, put the desiccant into the empty slot at the end of the box, and put the filament spool in.\u003c\/li\u003e\n\u003cli\u003eAfter putting in the filament spool, pull the filament out from the outlet and close the upper cover. (The pulling direction of the filament can be from bottom to top, or top to bottom, adjusted according to different positions of the printer).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e\u003cstrong\u003eParameter Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eThe product has a total of 4 buttons, which are on-off key\u003c\/span\u003e\u003cspan\u003e, \"M\" function key\u003c\/span\u003e\u003cspan\u003e, up key\u003c\/span\u003e\u003cspan\u003e and down key\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTwo modes: temperature setting mode \u003cstrong\u003eTEMP\u003c\/strong\u003e, heating time setting \u003cstrong\u003eTIME\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress \"M\" \u003c\/span\u003e\u003cspan\u003eto switch the function cyclically, and adjust the parameters with \u003c\/span\u003e\u003cspan\u003etwo directional keys.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBy default, the system enters sleep after 5 seconds of inactivity, and the backlight disappears in sleep mode. Press any key to wake up, and then press the power button to shut down after wakeup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDescription of Temperature Setting Mode\u003c\/h3\u003e\n\u003cp\u003ePress the function key \"M\" three times to switch to the temperature setting mode after power on. The screen will display TEMP. There are 3 levels in total, adjusted by the up or down key; the larger the number, the higher the temperature, and when it displays \"0\", it means no heating.\u003c\/p\u003e\n\u003cp\u003eRefer to the table below for specific gear setting recommendations. Set the heating temperature to the 3rd level for the highest temperature.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\" data-mce-style=\"font-weight: 400;\"\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eFilament\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePLA\/PLA+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eABS\/ABS+\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePETG\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePVA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003eNylon\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003ePC\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 83px;\" data-mce-style=\"width: 83px;\"\u003e\n\u003cp style=\"text-align: center;\" align=\"left\" data-mce-style=\"text-align: center;\"\u003eLevel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 90px;\" data-mce-style=\"width: 90px;\"\u003e\n\u003cp align=\"center\"\u003e1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 88px;\" data-mce-style=\"width: 88px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 77px;\" data-mce-style=\"width: 77px;\"\u003e\n\u003cp align=\"center\"\u003e2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 58px;\" data-mce-style=\"width: 58px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 64.7031px;\" data-mce-style=\"width: 64.7031px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 40.2969px;\" data-mce-style=\"width: 40.2969px;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cem\u003eLevel Set for Temperature \u0026amp; Humidity Reference Table\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 534px;\" align=\"left\" border=\"1\" cellpadding=\"0\" cellspacing=\"0\" data-mce-style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eLevel\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e2\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e\u003cstrong\u003e3\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eHot plate TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e103℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e116℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e118℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside TEMP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e40℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e50℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e55℃\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 131px;\" data-mce-style=\"width: 131px;\"\u003e\n\u003cp align=\"left\"\u003eInside humidity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 125px;\" data-mce-style=\"width: 125px;\"\u003e\n\u003cp align=\"center\"\u003e34.2%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 135.438px;\" data-mce-style=\"width: 135.438px;\"\u003e\n\u003cp align=\"center\"\u003e23%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 128.562px;\" data-mce-style=\"width: 128.562px;\"\u003e\n\u003cp align=\"center\"\u003e15%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: The above data is tested under the conditions of indoor temperature 20℃ and humidity 55%. The temperature and humidity in the box will change slightly due to the different use environment.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 align=\"left\"\u003eHeating Time Setting Mode\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter turning on, press the function key \"M\" four times to switch to the heating time setting mode, the screen displays TIME, and the value displayed now is the remaining heating time in hours. \u003c\/li\u003e\n\u003cli\u003eThe value displayed in TIME mode decreases as time advances, similar to a countdown.\u003c\/li\u003e\n\u003cli\u003eIn TIME mode, press the up or down button to set the heating time, and each press will increase\/decrease by half an hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eQuestion\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePossible cause\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolution\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eNot enough drying effect\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFilaments have serious water absorption or high-temperature filaments (such as nylon, PEEK and other filaments that need high-temperature drying)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eeBOX Lite only has the function of maintaining constant temperature and humidity during printing. It is not suitable for drying filaments with serious water absorption and high temperature (such as nylon, PEEK and other filaments that need high temperature drying). It is not suitable to promote the drying function.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe screen does not light up, the buttons do not work, do not heat up, and the fan does not work\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDamaged components\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eQuality problems return to the factory for repair or replacement\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

ESun EBox Lite Filament Smart Storage & Dryer

Next Product

Product Description

$53.00 USD

Maximum quantity available reached.

Description

The eBOX Lite is a cost-effective storage box with constant temperature and humidity, moisture-proof and dust-proof and heating function specially developed by eSUN for 3D printing filaments. Compared with the old eBOX, eBOX Lite removes the weighing function and improves the cost performance; the upper cover is made of transparent material, which helps to observe the remaining of filaments in real time; the curved heating plate and the sheet metal heat conduction plate design make the heat more uniform and easier to maintain constant temperature and humidity; heat insulation and flame retardant insulation cotton are placed on both sides of the interior, which are safe and anti-scald, and also have the function of heat preservation; the fan adopts a long-life and low-noise turbo fan, which has good effect and low noise; it also has wide compatibility with most of the 0.5/1KG, 1.75/2.85mm filaments on the market such as PLA, ABS, PETG, PVA, ePA, ePA-CF, ePA-GF, PC, TPU-95A, etc.

Product properties

Store filaments at any time to prevent moisture and dust.
Transparent material, real-time observation of filament usage.
Uniform heat, the arc heating piece and the sheet metal heat conduction piece are easier to maintain constant temperature and humidity in the box.
High safety, heat insulation and flame retardant insulation cotton are placed on both sides to prevent scalding.
Wide compatibility, compatible with most 0.5/1KG, 1.75/2.85mm filaments on the market.
Low noise, using long-life and low-noise turbofan.

Features

Sealed box: Store filaments, moisture-proof and dust-proof.
Top cover PC material: Real-time observation of filaments usage, durable.
Arc heating film: Heat evenly, making it easier to maintain constant temperature and humidity in the box.
Curved sheet metal thermal conductive sheet: The temperature rises quickly and is more uniform.
Large chamber: Compatible with most 0.5/1KG, 1.75/2.85mm filaments on the market.
Insulation cotton: High safety, anti-scald.
Long-life, low-noise turbofan: Low noise, even hot air flow in the cavity, durable.

Instructions for use

Connect the adapter to AC100-240V~50/60Hz power supply, and insert the output end into the rear interface of the box.
Press the power button to turn on.
Open the upper cover, put the desiccant into the empty slot at the end of the box, and put the filament spool in.
After putting in the filament spool, pull the filament out from the outlet and close the upper cover. (The pulling direction of the filament can be from bottom to top, or top to bottom, adjusted according to different positions of the printer).

Parameter Settings

The product has a total of 4 buttons, which are on-off key, "M" function key, up key and down key.
Two modes: temperature setting mode TEMP, heating time setting TIME.
Press "M" to switch the function cyclically, and adjust the parameters with two directional keys.
By default, the system enters sleep after 5 seconds of inactivity, and the backlight disappears in sleep mode. Press any key to wake up, and then press the power button to shut down after wakeup.

Description of Temperature Setting Mode

Press the function key "M" three times to switch to the temperature setting mode after power on. The screen will display TEMP. There are 3 levels in total, adjusted by the up or down key; the larger the number, the higher the temperature, and when it displays "0", it means no heating.

Refer to the table below for specific gear setting recommendations. Set the heating temperature to the 3rd level for the highest temperature.

Level Set Reference Table

Filament	PLA/PLA+	ABS/ABS+	PETG	PVA	Nylon	PC
Level	1	2	2	3	3	3

Level Set for Temperature & Humidity Reference Table

Level	1	2	3
Hot plate TEMP	103℃	116℃	118℃
Inside TEMP	40℃	50℃	55℃
Inside humidity	34.2%	23%	15%

Note: The above data is tested under the conditions of indoor temperature 20℃ and humidity 55%. The temperature and humidity in the box will change slightly due to the different use environment.

Heating Time Setting Mode

After turning on, press the function key "M" four times to switch to the heating time setting mode, the screen displays TIME, and the value displayed now is the remaining heating time in hours.
The value displayed in TIME mode decreases as time advances, similar to a countdown.
In TIME mode, press the up or down button to set the heating time, and each press will increase/decrease by half an hour.

FAQ

Question	Possible cause	Solution
Not enough drying effect	Filaments have serious water absorption or high-temperature filaments (such as nylon, PEEK and other filaments that need high-temperature drying)	eBOX Lite only has the function of maintaining constant temperature and humidity during printing. It is not suitable for drying filaments with serious water absorption and high temperature (such as nylon, PEEK and other filaments that need high temperature drying). It is not suitable to promote the drying function.
The screen does not light up, the buttons do not work, do not heat up, and the fan does not work	Damaged components	Quality problems return to the factory for repair or replacement

Sku: ESUN-EBOX-LITE

Vendor: ESUN

Related Products

Sale

eSun eSpool - 1kg Reusable Spool for eSun Refilament

$2.00 USD $3.00

{"id":8298218258630,"title":"eSun eSpool - 1kg Reusable Spool for eSun Refilament","handle":"esun-espool-1kg-reusable-spool-for-esun-refilament","description":"\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cstrong\u003eeSUN eSpool is only compatible for the \u003ca href=\"https:\/\/www.digitmakers.ca\/search?type=product\u0026amp;q=refilament\"\u003eeSUN Refilament Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUses transparent polycarbonate for high strength and toughness.\u003c\/li\u003e\n\u003cli\u003eSheet body assembly structure: light weight, space saving, transportable, resourceful, reusable and environmentally friendly.\u003c\/li\u003e\n\u003cli\u003eLarge hollow structure: PC can withstand high temperatures, making it convenient for drying conventional and high-performance filaments.\u003c\/li\u003e\n\u003cli\u003eThe packaging bag is made of biodegradable and environmentally friendly PBAT and PLA biological materials, in line with EU export standards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ctable border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Features\"}'\u003eFeatures\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Advantage\"}'\u003eAdvantage\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Benefit\"}'\u003eBenefit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"High toughness and strength\"}'\u003eHigh toughness and strength\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Reusable\"}'\u003eReusable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Assembled structure\"}'\u003eAssembled structure\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Saving space\"}'\u003eSaving space\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Save space, convenient transportation, save resources, and environment friendly\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eSave space, convenient transportation, save resources, and environment friendly\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snap design\"}'\u003eSnap design\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Firm\"}'\u003eFirm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"No loosening occurs during use\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eNo loosening occurs during use\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"The packaging bag uses PBAT and PLA biological materials\"}'\u003eThe packaging bag uses PBAT and PLA biological materials\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Degradable\"}'\u003eDegradable\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Environmental friendly, in line with EU export standards\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eEnvironmental friendly, in line with EU export standards\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Large hollow structure, PC material\"}'\u003eLarge hollow structure, PC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Breathable and good temperature resistance\"}'\u003eBreathable and good temperature resistance\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Convenient for drying conventional and high-performance filaments.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eConvenient for drying conventional and high-performance filaments.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Transparent\"}'\u003eTransparent\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Observe the usage of filaments in real time.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eObserve the usage of filaments in real time.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct patent:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUtility model (examination); design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDistinguish the front and back of the eSpool, the side with grooves and label slots is the front side, and the smooth side is the back side.\u003c\/li\u003e\n\u003cli\u003eAlign the 3 tabs of the small piece with the fixing holes and insert them into the back of the disc.\u003c\/li\u003e\n\u003cli\u003ePut the filament into the eSpool.\u003c\/li\u003e\n\u003cli\u003eAlign the other disc with the fixed pillar and press down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions: \u003ca href=\"http:\/\/www.esun3d.net\/UploadFiles\/files\/2020\/11\/19\/fd7ee36e7ab549f29a92318d9a61d008.mp4\" target=\"_blank\"\u003e\u003cspan\u003eeSpool uses video\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\" alt=\"\" width=\"209\" height=\"178\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\"\u003e\u003cimg height=\"212\" width=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"205\" width=\"205\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-3_480x480.png?v=1614710427\" alt=\"\"\u003e\u003cimg height=\"213\" width=\"213\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e Possible reasons\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to insert\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eInserting into the wrong side\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThe concave side is the outer side of the spool, and the smooth side is the inner side of the spool.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWhen changing filaments, the remaining filaments are scattered\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eChange filaments without using up\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIt is recommended to use half or more before replacement. Before changing the filament, use a band to pass through the hollow part to bind the remaining filaments.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHarder to hold by hand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUse tools, or use greater force to press and pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e NOTE: This is a consumable item that is not under warranty.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cstrong\u003eClick here\u003c\/strong\u003e\u003c\/a\u003e if you would like to 3D print the spool (please select Second Generation model)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 19.6px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003eCommonly purchased together with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-pla-refilament-175-mm-1kg-spool-various-colors?variant=39300531585186\"\u003eeSun Refilament PLA+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-petg-refilament-1-75-mm-1-kg-spooless-various-colors?variant=31380676509827\"\u003eeSun Refilament PETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-evacuum-kit-10-vacuum-bags\"\u003eeSun eVacuum Kit (10 Vacuum Bags)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-ebox-filament-storage\"\u003eeSun eBox Filament Smart Storage and Dryer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-10-04T16:09:05-04:00","created_at":"2024-08-19T15:54:59-04:00","vendor":"ESUN","type":"Accessories","tags":["accessories","Box","boxing","dryer","ebox","esun ebox","esun filament","esun refilament","esun refills","Filament","filament dryer","offer","petg refilament","petg refills","petg spooless","pla+ spooless","refilament","Refill","refill coil","refill filament","Spooless"],"price":200,"price_min":200,"price_max":200,"available":true,"price_varies":false,"compare_at_price":300,"compare_at_price_min":300,"compare_at_price_max":300,"compare_at_price_varies":false,"variants":[{"id":44031136989382,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ESUN-SPL-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"eSun eSpool - 1kg Reusable Spool for eSun Refilament","public_title":null,"options":["Default Title"],"price":200,"weight":500,"compare_at_price":300,"inventory_management":"shopify","barcode":"6922572200760","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/7_1cd55b54-e618-4092-b3b3-f87927f2b411.jpg?v=1724287155","\/\/digitmakers.com\/cdn\/shop\/files\/1_dce16b21-6a87-48d4-9893-85ab855b185e.jpg?v=1724287155","\/\/digitmakers.com\/cdn\/shop\/files\/6_5b10453f-ccd0-4ae4-82cc-1cda329917fe.jpg?v=1724287155","\/\/digitmakers.com\/cdn\/shop\/files\/2_3d9a68db-cdc1-415a-893b-4dd90bd663c2.jpg?v=1724287155","\/\/digitmakers.com\/cdn\/shop\/files\/4_ed11dbae-dd44-476a-ada1-a9412b67eba8.jpg?v=1724287155","\/\/digitmakers.com\/cdn\/shop\/files\/5_5e03eff3-8beb-4521-a2b4-3863b9d60dbe.jpg?v=1724287155"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/7_1cd55b54-e618-4092-b3b3-f87927f2b411.jpg?v=1724287155","options":["Title"],"media":[{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":30368410960070,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/7_1cd55b54-e618-4092-b3b3-f87927f2b411.jpg?v=1724287155"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/7_1cd55b54-e618-4092-b3b3-f87927f2b411.jpg?v=1724287155","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":30368410992838,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/1_dce16b21-6a87-48d4-9893-85ab855b185e.jpg?v=1724287155"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/1_dce16b21-6a87-48d4-9893-85ab855b185e.jpg?v=1724287155","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":30368411025606,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/6_5b10453f-ccd0-4ae4-82cc-1cda329917fe.jpg?v=1724287155"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/6_5b10453f-ccd0-4ae4-82cc-1cda329917fe.jpg?v=1724287155","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":30368411058374,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/2_3d9a68db-cdc1-415a-893b-4dd90bd663c2.jpg?v=1724287155"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/2_3d9a68db-cdc1-415a-893b-4dd90bd663c2.jpg?v=1724287155","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":30368411091142,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/4_ed11dbae-dd44-476a-ada1-a9412b67eba8.jpg?v=1724287155"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/4_ed11dbae-dd44-476a-ada1-a9412b67eba8.jpg?v=1724287155","width":1200},{"alt":"eSun eSpool - 1kg Reusable Spool for eSun Refilament - Digitmakers.ca","id":30368411123910,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/5_5e03eff3-8beb-4521-a2b4-3863b9d60dbe.jpg?v=1724287155"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/5_5e03eff3-8beb-4521-a2b4-3863b9d60dbe.jpg?v=1724287155","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cstrong\u003eeSUN eSpool is only compatible for the \u003ca href=\"https:\/\/www.digitmakers.ca\/search?type=product\u0026amp;q=refilament\"\u003eeSUN Refilament Series\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWith the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUses transparent polycarbonate for high strength and toughness.\u003c\/li\u003e\n\u003cli\u003eSheet body assembly structure: light weight, space saving, transportable, resourceful, reusable and environmentally friendly.\u003c\/li\u003e\n\u003cli\u003eLarge hollow structure: PC can withstand high temperatures, making it convenient for drying conventional and high-performance filaments.\u003c\/li\u003e\n\u003cli\u003eThe packaging bag is made of biodegradable and environmentally friendly PBAT and PLA biological materials, in line with EU export standards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ctable border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"100\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Features\"}'\u003eFeatures\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Advantage\"}'\u003eAdvantage\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Benefit\"}'\u003eBenefit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"High toughness and strength\"}'\u003eHigh toughness and strength\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Reusable\"}'\u003eReusable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Assembled structure\"}'\u003eAssembled structure\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Saving space\"}'\u003eSaving space\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Save space, convenient transportation, save resources, and environment friendly\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eSave space, convenient transportation, save resources, and environment friendly\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Snap design\"}'\u003eSnap design\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Firm\"}'\u003eFirm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"No loosening occurs during use\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eNo loosening occurs during use\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"The packaging bag uses PBAT and PLA biological materials\"}'\u003eThe packaging bag uses PBAT and PLA biological materials\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Degradable\"}'\u003eDegradable\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Environmental friendly, in line with EU export standards\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eEnvironmental friendly, in line with EU export standards\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Large hollow structure, PC material\"}'\u003eLarge hollow structure, PC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Breathable and good temperature resistance\"}'\u003eBreathable and good temperature resistance\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Convenient for drying conventional and high-performance filaments.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eConvenient for drying conventional and high-performance filaments.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"PC material\"}'\u003ePC material\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Transparent\"}'\u003eTransparent\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Observe the usage of filaments in real time.\"}'\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eObserve the usage of filaments in real time.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct patent:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUtility model (examination); design.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDistinguish the front and back of the eSpool, the side with grooves and label slots is the front side, and the smooth side is the back side.\u003c\/li\u003e\n\u003cli\u003eAlign the 3 tabs of the small piece with the fixing holes and insert them into the back of the disc.\u003c\/li\u003e\n\u003cli\u003ePut the filament into the eSpool.\u003c\/li\u003e\n\u003cli\u003eAlign the other disc with the fixed pillar and press down.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions: \u003ca href=\"http:\/\/www.esun3d.net\/UploadFiles\/files\/2020\/11\/19\/fd7ee36e7ab549f29a92318d9a61d008.mp4\" target=\"_blank\"\u003e\u003cspan\u003eeSpool uses video\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\" alt=\"\" width=\"209\" height=\"178\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-1_480x480.png?v=1614710347\"\u003e\u003cimg height=\"212\" width=\"212\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-2_480x480.png?v=1614710378\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"205\" width=\"205\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-3_480x480.png?v=1614710427\" alt=\"\"\u003e\u003cimg height=\"213\" width=\"213\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/espool-instructions-4_480x480.png?v=1614710465\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e Possible reasons\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to insert\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eInserting into the wrong side\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThe concave side is the outer side of the spool, and the smooth side is the inner side of the spool.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWhen changing filaments, the remaining filaments are scattered\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eChange filaments without using up\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIt is recommended to use half or more before replacement. Before changing the filament, use a band to pass through the hollow part to bind the remaining filaments.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eThe latch structure is difficult to pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHarder to hold by hand\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUse tools, or use greater force to press and pull out\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e NOTE: This is a consumable item that is not under warranty.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cstrong\u003eClick here\u003c\/strong\u003e\u003c\/a\u003e if you would like to 3D print the spool (please select Second Generation model)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 19.6px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/stlfilesforthereusablespoolesun.zip?v=1622236055\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003eCommonly purchased together with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-pla-refilament-175-mm-1kg-spool-various-colors?variant=39300531585186\"\u003eeSun Refilament PLA+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-petg-refilament-1-75-mm-1-kg-spooless-various-colors?variant=31380676509827\"\u003eeSun Refilament PETG\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-evacuum-kit-10-vacuum-bags\"\u003eeSun eVacuum Kit (10 Vacuum Bags)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/esun-ebox-filament-storage\"\u003eeSun eBox Filament Smart Storage and Dryer\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}

eSun eSpool - 1kg Reusable Spool for eSun Refilament

$2.00

eSUN eSpool is only compatible for the eSUN Refilament Series With the growing popularity of 3D printing technology, the usage of 3D printing filaments has also increased. The filaments used in FDM 3D printing are mostly spooled, which occupies space and weight. To protect our environment, the detachable and reusable eSpool was designed. Advan...

PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro/Pro3

$29.00 USD

{"id":8298215145670,"title":"PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro\/Pro3","handle":"printdry-large-spool-kit-double-wall-for-print-dry-filament-dryer-pro-pro3","description":"\u003cul\u003e\n\u003cli\u003eDouble-wall chamber\u003c\/li\u003e\n\u003cli\u003eUsed with the PrintDry Filament Dryer PRO\/PRO3.\u003c\/li\u003e\n\u003cli\u003eTo dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen drying and printing a new 12″ filament spool, please set the temperature 10C lower to start with. After about 25% filament has been printed, then the temperature can be reset to the normal recommended temperature for this filament. This will avoid filament over-heating.\u003c\/p\u003e\n\u003cp\u003ePackage includes:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlastic tray x1\u003c\/li\u003e\n\u003cli\u003eLong metal shaft x1\u003c\/li\u003e\n\u003c\/ol\u003e","published_at":"2024-11-05T13:26:15-05:00","created_at":"2024-08-19T15:54:45-04:00","vendor":"Printdry","type":"Accessories","tags":["Box","dryer","Filament","filament dryer","filament spool holder","Large spool kit","new-arrivals","printdry","printdry filament spool holder","printdry pro","spool holder","Spool holder kit","spool kit"],"price":2900,"price_min":2900,"price_max":2900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031130501318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PNTDRY-LRG-DYER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro\/Pro3","public_title":null,"options":["Default Title"],"price":2900,"weight":1500,"compare_at_price":null,"inventory_management":"shopify","barcode":"628011798213","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/IMG_2860_823122a2-da80-4a98-9521-d93190269ef2.png?v=1724283374"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/IMG_2860_823122a2-da80-4a98-9521-d93190269ef2.png?v=1724283374","options":["Title"],"media":[{"alt":"PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro\/Pro3 - Digitmakers.ca","id":30368201375942,"position":1,"preview_image":{"aspect_ratio":1.5,"height":1365,"width":2048,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/IMG_2860_823122a2-da80-4a98-9521-d93190269ef2.png?v=1724283374"},"aspect_ratio":1.5,"height":1365,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/IMG_2860_823122a2-da80-4a98-9521-d93190269ef2.png?v=1724283374","width":2048}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eDouble-wall chamber\u003c\/li\u003e\n\u003cli\u003eUsed with the PrintDry Filament Dryer PRO\/PRO3.\u003c\/li\u003e\n\u003cli\u003eTo dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen drying and printing a new 12″ filament spool, please set the temperature 10C lower to start with. After about 25% filament has been printed, then the temperature can be reset to the normal recommended temperature for this filament. This will avoid filament over-heating.\u003c\/p\u003e\n\u003cp\u003ePackage includes:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlastic tray x1\u003c\/li\u003e\n\u003cli\u003eLong metal shaft x1\u003c\/li\u003e\n\u003c\/ol\u003e"}

PrintDry Large Spool Kit (Double-wall) For Print Dry Filament Dryer Pro/Pro3

$29.00

Double-wall chamber Used with the PrintDry Filament Dryer PRO/PRO3. To dry and feed up to 5Kg filament spool with max 300mm or 12” spool outside diameter. Note: When drying and printing a new 12″ filament spool, please set the temperature 10C lower to start with. After about 25% filament has been printed, then the temperature can be reset to ...

PrintDry Smart Vacuum Filament Container

$98.00 USD

{"id":8298207215814,"title":"PrintDry Smart Vacuum Filament Container","handle":"printdry-smart-vacuum-filament-container","description":"\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\" alt=\"One-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\" width=\"487\" height=\"274\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ePrintDry\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e is proud to announce our newest filament storage solution -- a SMART solution! With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button. No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops. This prevents leakage over an extended period of time. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eStore your filament easily\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ewithout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eworrying about the leaks.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe data-mce-fragment=\"1\" width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"496\" width=\"461\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/674\/804\/69a8ac48b4207b2576c8e0c53fc439f5_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1622127164\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=b0add0b1d758664ccd2111fa3e13ca21\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhy vacuum storage is important for filament?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eExcess moisture in filament leads to defects in 3D printing. If some of your prints look like the pictures below, this may be due to water content built-up in the filament. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"122\" width=\"491\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/429\/763\/be30f7b2a83ad652798dff2779e0c7ca_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613686666\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=d6ae966af4c8ef0580bda8028232c08c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Journey\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"216\" width=\"414\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/846\/ab56d123491bddef7e769fdac317f07f_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615568108\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=001bc09e37553b6a528769eee1f8264c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur current vacuum filament container uses a hand pump to create a vacuum. It's done manually but it works. However, it doesn't know if there is a leakage which will compromise the seal over time. As the result, the filament will absorb moisture slowly which can affect your print. So we came up with our smart vacuum filament container.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne Touch Sealing\/Open\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"381\" width=\"487\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/474\/764\/68f75cfd4e3d1d7fd384e3112b34febf_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620753131\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=76fa1f06d9f8481408c1ac1fc4d04554\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eHold Up To 3 Spools \u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg height=\"315\" width=\"466\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/696\/573\/9165ccc2d9658dc110526de68a4d8fa2_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615472692\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4deaa8e37d8e40dc343e427cc0c14a26\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e Rechargeable Battery\u003c\/h2\u003e\n\u003cp\u003eThe battery last about 2 months if only opening and closing once a day.\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eAdditional Features:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/462\/701\/8eaf3b559f2f7a91380b5fdf741fb637_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620676772\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=8f14be9f3d8ecd11c28191342c9b8ea2\" width=\"493\" height=\"542\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/580\/994\/e2822d14628bc7534290b3571bd912c0_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1614717152\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=550061f62f37f2fc005266e3db0c5ef6\" width=\"483\" height=\"516\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLong-lasting design\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eExtra thick wall is used.\u003c\/p\u003e\n\u003ch3\u003eReusability and recyclability\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eThe container body is 100% recyclable.\u003c\/p\u003e\n\u003ch3\u003eEnvironmentally friendly factories\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eSolar panels are partially providing the power to our factory.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e","published_at":"2024-11-05T13:22:50-05:00","created_at":"2024-08-19T15:54:11-04:00","vendor":"Printdry","type":"Accessories","tags":["accessories","Box","dryer","Filament","filament dryer","new-arrivals","printdry","vacuum","vacuum container","vacuum seal"],"price":9800,"price_min":9800,"price_max":9800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031113986246,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PRNTDRY-SMRT-VAC-CNTR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PrintDry Smart Vacuum Filament Container","public_title":null,"options":["Default Title"],"price":9800,"weight":7000,"compare_at_price":null,"inventory_management":"shopify","barcode":"628011798176","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/Untitled-2_9f805856-1f0a-44d5-809e-1c2c6d135a49.jpg?v=1724286049"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/Untitled-2_9f805856-1f0a-44d5-809e-1c2c6d135a49.jpg?v=1724286049","options":["Title"],"media":[{"alt":"PrintDry Smart Vacuum Filament Container - Digitmakers.ca","id":30368349946054,"position":1,"preview_image":{"aspect_ratio":1.063,"height":873,"width":928,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Untitled-2_9f805856-1f0a-44d5-809e-1c2c6d135a49.jpg?v=1724286049"},"aspect_ratio":1.063,"height":873,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Untitled-2_9f805856-1f0a-44d5-809e-1c2c6d135a49.jpg?v=1724286049","width":928}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\" alt=\"One-Touch Sealing \u0026amp; Auto Re-Sealing -- Smart Filament Storage Solution\" width=\"487\" height=\"274\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/591\/5e6ed35091a210ec3830024cfa27ecfd_original.jpg?ixlib=rb-4.0.2\u0026amp;crop=faces\u0026amp;w=1552\u0026amp;h=873\u0026amp;fit=crop\u0026amp;v=1615567072\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=7aca07c7c7418788f2fd11b6a313f0b5\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ePrintDry\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e is proud to announce our newest filament storage solution -- a SMART solution! With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button. No more manual pumps. More importantly, we also integrated a re-sealing sensor inside, which constantly monitors the vacuum level and will automatically activate the vacuum pump once the vacuum level drops. This prevents leakage over an extended period of time. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eStore your filament easily\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003ewithout\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"bold\"\u003eworrying about the leaks.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe data-mce-fragment=\"1\" width=\"500\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gvXUXs0wdp0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"496\" width=\"461\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/674\/804\/69a8ac48b4207b2576c8e0c53fc439f5_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1622127164\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=b0add0b1d758664ccd2111fa3e13ca21\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eWhy vacuum storage is important for filament?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eExcess moisture in filament leads to defects in 3D printing. If some of your prints look like the pictures below, this may be due to water content built-up in the filament. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"122\" width=\"491\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/429\/763\/be30f7b2a83ad652798dff2779e0c7ca_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1613686666\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=d6ae966af4c8ef0580bda8028232c08c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Journey\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"216\" width=\"414\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/712\/846\/ab56d123491bddef7e769fdac317f07f_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615568108\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=001bc09e37553b6a528769eee1f8264c\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur current vacuum filament container uses a hand pump to create a vacuum. It's done manually but it works. However, it doesn't know if there is a leakage which will compromise the seal over time. As the result, the filament will absorb moisture slowly which can affect your print. So we came up with our smart vacuum filament container.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eOne Touch Sealing\/Open\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg height=\"381\" width=\"487\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/474\/764\/68f75cfd4e3d1d7fd384e3112b34febf_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620753131\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=76fa1f06d9f8481408c1ac1fc4d04554\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eHold Up To 3 Spools \u003cbr\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg height=\"315\" width=\"466\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/696\/573\/9165ccc2d9658dc110526de68a4d8fa2_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1615472692\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4deaa8e37d8e40dc343e427cc0c14a26\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e Rechargeable Battery\u003c\/h2\u003e\n\u003cp\u003eThe battery last about 2 months if only opening and closing once a day.\u003c\/p\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\" data-mce-src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/432\/917\/7635b26eb939d284e9a9225ac351d032_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620421679\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=4a5640ad6238488de68e47ab4ce56f22\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eAdditional Features:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/033\/462\/701\/8eaf3b559f2f7a91380b5fdf741fb637_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1620676772\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=8f14be9f3d8ecd11c28191342c9b8ea2\" width=\"493\" height=\"542\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ksr-ugc.imgix.net\/assets\/032\/580\/994\/e2822d14628bc7534290b3571bd912c0_original.jpg?ixlib=rb-4.0.2\u0026amp;w=680\u0026amp;fit=max\u0026amp;v=1614717152\u0026amp;auto=format\u0026amp;frame=1\u0026amp;q=92\u0026amp;s=550061f62f37f2fc005266e3db0c5ef6\" width=\"483\" height=\"516\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLong-lasting design\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eExtra thick wall is used.\u003c\/p\u003e\n\u003ch3\u003eReusability and recyclability\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eThe container body is 100% recyclable.\u003c\/p\u003e\n\u003ch3\u003eEnvironmentally friendly factories\u003c\/h3\u003e\n\u003cp class=\"mb2 text-preline\"\u003eSolar panels are partially providing the power to our factory.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e"}

PrintDry Smart Vacuum Filament Container

$98.00

One-Touch Sealing & Auto Re-Sealing -- Smart Filament Storage Solution PrintDry is proud to announce our newest filament storage solution -- a SMART solution! With a built-in vacuum pump and a rechargeable battery, this filament container can be vacuum sealed by pushing ONE button. No more manual pumps. More importantly, we also integrate...

Slice Engineering Filament Drying Desiccant

$19.00 USD

{"id":8298225369286,"title":"Slice Engineering Filament Drying Desiccant","handle":"slice-engineering-filament-drying-desiccant","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eActivated alumina desiccant is \u003cstrong data-mce-fragment=\"1\"\u003e10x more powerful\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ethan comparable silica gel, and is non-toxic!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCreates enough of a relative humidity (Rh) gradient to absorb both surface moisture and water particles captured inside the filament.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel canister is perfectly sized to fit in the center of your filament spool.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesiccant is infinitely rechargeable in the stainless steel container.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHumidity indicator card included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo use simply remove the outer shrink wrap and pop off the cap, then insert the canister into the center of your filament spool. Store the spool in an airtight container and watch the humidity drop!\u003c\/p\u003e","published_at":"2024-11-05T13:26:18-05:00","created_at":"2024-08-19T15:55:27-04:00","vendor":"Slice Engineering","type":"Accessories","tags":["activated alumina","filament drying desiccant","filament-dryer","slice engineering"],"price":1900,"price_min":1900,"price_max":1900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031149539526,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SE-FLDD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Slice Engineering Filament Drying Desiccant","public_title":null,"options":["Default Title"],"price":1900,"weight":1000,"compare_at_price":null,"inventory_management":"shopify","barcode":"850005423690","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/DSCF3420copy_540x_4c088e91-ab33-4ff0-969e-8f058e47b7ae.jpg?v=1724285726"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/DSCF3420copy_540x_4c088e91-ab33-4ff0-969e-8f058e47b7ae.jpg?v=1724285726","options":["Title"],"media":[{"alt":"Slice Engineering Filament Drying Desiccant - Digitmakers.ca","id":30368337035462,"position":1,"preview_image":{"aspect_ratio":1.0,"height":540,"width":540,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/DSCF3420copy_540x_4c088e91-ab33-4ff0-969e-8f058e47b7ae.jpg?v=1724285726"},"aspect_ratio":1.0,"height":540,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/DSCF3420copy_540x_4c088e91-ab33-4ff0-969e-8f058e47b7ae.jpg?v=1724285726","width":540}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eActivated alumina desiccant is \u003cstrong data-mce-fragment=\"1\"\u003e10x more powerful\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ethan comparable silica gel, and is non-toxic!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCreates enough of a relative humidity (Rh) gradient to absorb both surface moisture and water particles captured inside the filament.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel canister is perfectly sized to fit in the center of your filament spool.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesiccant is infinitely rechargeable in the stainless steel container.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHumidity indicator card included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo use simply remove the outer shrink wrap and pop off the cap, then insert the canister into the center of your filament spool. Store the spool in an airtight container and watch the humidity drop!\u003c\/p\u003e"}

Slice Engineering Filament Drying Desiccant

$19.00

Activated alumina desiccant is 10x more powerful than comparable silica gel, and is non-toxic! Creates enough of a relative humidity (Rh) gradient to absorb both surface moisture and water particles captured inside the filament. Stainless steel canister is perfectly sized to fit in the center of your filament spool. Desiccant is infinitely rech...