Bluecast Castable Wax Resin -CR3A- 500g

{"id":8298232611014,"title":"BlueCast X-FILIGREE V2","handle":"bluecast-x-filigree-v2","description":"\u003cp\u003eX-Filigree® V2 improved the performance of the previous version. The new resin has been improved to meet the needs of Middle Eastern designers. Thanks to the waxy polymer it ensures perfect printing properties with sharp details, excellent dimensional stability in time without shrinkage . X-filigree® V2 was developed by BLueCast R\u0026amp;D in order to allow perfect filigree casting results with any kind of investments and burnout cycles. Standard wax burnout (12 hrs), Fast burnout ( 6 hrs), Ultra fast burnout (2 hrs).\u003c\/p\u003e\n\u003cp\u003eBLUECAST X-Filigree® \u003c\/p\u003e\n\u003cp\u003ePlease read and understand these Guidelines before opening and using XFiligree resin.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e PRODUCT FEATURES \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- The first low temperature castable resin specifically developed for print and casting extreme filigree designs. \u003c\/p\u003e\n\u003cp\u003e- Perfect casting results with any kind of investments and burnout cycles. Standard wax burnout (12 hrs), Fast burnout ( 6 hrs), Ultra fast burnout (2 hrs). \u003c\/p\u003e\n\u003cp\u003e- Extreme accuracy and weight repeatability. \u003c\/p\u003e\n\u003cp\u003e- Perfect printing properties with sharp details: suitable for jewelry with micropave and filigree \u003c\/p\u003e\n\u003cp\u003e- Create lighter jewelry with perfect accurancy  - No bleeding issue also on LCD machines. \u003c\/p\u003e\n\u003cp\u003e- Excellent dimensional stability in time. No shrinkage. \u003c\/p\u003e\n\u003cp\u003e- Low viscosity even at low temperature (easier to clean, easier to get back from patterns).  - Strong adhesion to platform, no need to primer. \u003c\/p\u003e\n\u003cp\u003e- Toxic and carcinogenic component free, Low fumes emission during burnout. Very low VOC and negligible smell. \u003c\/p\u003e\n\u003cp\u003e- Low fumes emission during burnout\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQUICK START GUIDE FOR LCD PRINTERS   \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore use X-Filigree please read these instructions with attention.  Following information are suitable only for X-Filigree resin and will not apply to other BlueCast resins. \u003c\/p\u003e\n\u003cp\u003eBlueCast X-Filigree resin is fully compatible with the new monochromatic LCD Generation and DLP printers. \u003c\/p\u003e\n\u003ch4\u003eMain features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCreate Jewelry with unmatched precision\u003c\/li\u003e\n\u003cli\u003eNo bleeding, zero shrinkage, low viscosity even at low temperatures\u003c\/li\u003e\n\u003cli\u003eIdeal printing properties suitable for light jewelry with sharp details, micro-pave, highly detailed parts and filigree\u003c\/li\u003e\n\u003cli\u003eStrong platform adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn old RGB LCD machines the exposure times are much more longer than standard resins. With some COB LED machines the resin may not work.\u003c\/p\u003e\n\u003cp\u003eIn order to get the maximum details use of HD FEP or No-FEP are strongly suggested. A bad quality FEP compromise the resin printability.\u003c\/p\u003e\n\u003cp\u003eBefore run the Z-Axis calibration, please check if your build platform is planar. The colored platform coating like the one of the old Anycubic Photon or Elegoo Mars inhibits the sticking of the castable resins. To fix this machine issues you can sand the build platform with 150\/200 grade sandpaper.\u003c\/p\u003e\n\u003cp\u003ePerform z-axis calibration following the manufacturer's instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore use we suggest to heat the resin by microwave ovens (NEVER OVER 30 SECONDS), ultrasonic cleaner, hot air, etc. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore pour the resin into the resin tank shake the bottle for one minute.\u003c\/p\u003e\n\u003cp\u003eFor a correct debubbling let the resin rest in to the resin tank for 5 minutes before start the print. To speed up the operations you can also filter the resin in order to remove the air bubbles or or vacuum the opened bottle.\u003c\/p\u003e\n\u003cp\u003eNot filter the resin after each print and not heating the resin before each print may lead to printing failures. Do not store the resin in to the tank. Please remove the resin from printer tank, filter it and store in to the original bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE THE EXPOSURE TIME CAN CHANGE BY 30% IN ACCORDING TO THE MANUFACTURER LED CALIBRATION, TO THE USED FEP AND TO THE PRINTER EFFICIENCY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRINTING SETTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe don’t provide official after sales service for the machines not listed below. The settings are specifically developed for Chitubox slicer.\u003c\/p\u003e\n\u003cp\u003eANYCUBIC MONO\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.05 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 15 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 25 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min ® 3\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC MONO SE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.03 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 10 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 5.2 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 15 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC MONO X\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.03 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 15 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 8.5 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC MONO 4K\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.03 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 15 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4 ®\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC PHOTON S\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.05 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 12 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 19 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 45 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 8 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 70 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 70 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: OFF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePHROZEN SONIC MINI 4K\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.035 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 6.5 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 12 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003ePHROZEN SONIC MINI 8K\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.030 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 8 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003ePHROZEN SONIC 4K ® 5\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.035 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 6.0 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 12 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePHROZEN SONIC 4K XL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.05 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 5.5 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-11-05T13:24:27-05:00","created_at":"2024-08-19T15:56:02-04:00","vendor":"Digitmakers.ca","type":"Resin","tags":["3D printer resin","500g","blue cast","bluecast","bluecast resin","bluecast x one","Bluecast x1","Business","cast","castable","castable resin","ceramic","customizer","Digitmakers.ca","DLP","jewelry","jewelry resin","LCD","lcd 500","Resin","resin 3dprinter","Shopify Collective","SLA","v2","wax","x","x-filigree","X-FILIGREE V2"],"price":12600,"price_min":12600,"price_max":12600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031164088518,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC-X-FILGRE-LCD-DLP-500G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BlueCast X-FILIGREE V2","public_title":null,"options":["Default Title"],"price":12600,"weight":2000,"compare_at_price":null,"inventory_management":"shopify","barcode":"79276262","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_7173222bb43640e2b81e16400013e744_mv2.webp?v=1724097365","\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-5828673.jpg?v=1724097365","\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-3417059.jpg?v=1724097366","\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-8155622.jpg?v=1724097365","\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-6962434.jpg?v=1724097365","\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-8609176.jpg?v=1724097365","\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-2712593.jpg?v=1724097365"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_7173222bb43640e2b81e16400013e744_mv2.webp?v=1724097365","options":["Title"],"media":[{"alt":null,"id":30360835621062,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_7173222bb43640e2b81e16400013e744_mv2.webp?v=1724097365"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_7173222bb43640e2b81e16400013e744_mv2.webp?v=1724097365","width":420},{"alt":null,"id":30360835686598,"position":2,"preview_image":{"aspect_ratio":1.328,"height":1024,"width":1360,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-5828673.jpg?v=1724097365"},"aspect_ratio":1.328,"height":1024,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-5828673.jpg?v=1724097365","width":1360},{"alt":null,"id":30360835752134,"position":3,"preview_image":{"aspect_ratio":1.328,"height":1024,"width":1360,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-3417059.jpg?v=1724097366"},"aspect_ratio":1.328,"height":1024,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-3417059.jpg?v=1724097366","width":1360},{"alt":null,"id":30360835784902,"position":4,"preview_image":{"aspect_ratio":1.339,"height":765,"width":1024,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-8155622.jpg?v=1724097365"},"aspect_ratio":1.339,"height":765,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-8155622.jpg?v=1724097365","width":1024},{"alt":null,"id":30360835915974,"position":5,"preview_image":{"aspect_ratio":1.333,"height":576,"width":768,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-6962434.jpg?v=1724097365"},"aspect_ratio":1.333,"height":576,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-6962434.jpg?v=1724097365","width":768},{"alt":null,"id":30360836047046,"position":6,"preview_image":{"aspect_ratio":1.328,"height":1024,"width":1360,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-8609176.jpg?v=1724097365"},"aspect_ratio":1.328,"height":1024,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-8609176.jpg?v=1724097365","width":1360},{"alt":null,"id":30360836079814,"position":7,"preview_image":{"aspect_ratio":1.329,"height":1024,"width":1361,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-2712593.jpg?v=1724097365"},"aspect_ratio":1.329,"height":1024,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/x-filigree-v2-2712593.jpg?v=1724097365","width":1361}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eX-Filigree® V2 improved the performance of the previous version. The new resin has been improved to meet the needs of Middle Eastern designers. Thanks to the waxy polymer it ensures perfect printing properties with sharp details, excellent dimensional stability in time without shrinkage . X-filigree® V2 was developed by BLueCast R\u0026amp;D in order to allow perfect filigree casting results with any kind of investments and burnout cycles. Standard wax burnout (12 hrs), Fast burnout ( 6 hrs), Ultra fast burnout (2 hrs).\u003c\/p\u003e\n\u003cp\u003eBLUECAST X-Filigree® \u003c\/p\u003e\n\u003cp\u003ePlease read and understand these Guidelines before opening and using XFiligree resin.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e PRODUCT FEATURES \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- The first low temperature castable resin specifically developed for print and casting extreme filigree designs. \u003c\/p\u003e\n\u003cp\u003e- Perfect casting results with any kind of investments and burnout cycles. Standard wax burnout (12 hrs), Fast burnout ( 6 hrs), Ultra fast burnout (2 hrs). \u003c\/p\u003e\n\u003cp\u003e- Extreme accuracy and weight repeatability. \u003c\/p\u003e\n\u003cp\u003e- Perfect printing properties with sharp details: suitable for jewelry with micropave and filigree \u003c\/p\u003e\n\u003cp\u003e- Create lighter jewelry with perfect accurancy  - No bleeding issue also on LCD machines. \u003c\/p\u003e\n\u003cp\u003e- Excellent dimensional stability in time. No shrinkage. \u003c\/p\u003e\n\u003cp\u003e- Low viscosity even at low temperature (easier to clean, easier to get back from patterns).  - Strong adhesion to platform, no need to primer. \u003c\/p\u003e\n\u003cp\u003e- Toxic and carcinogenic component free, Low fumes emission during burnout. Very low VOC and negligible smell. \u003c\/p\u003e\n\u003cp\u003e- Low fumes emission during burnout\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQUICK START GUIDE FOR LCD PRINTERS   \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore use X-Filigree please read these instructions with attention.  Following information are suitable only for X-Filigree resin and will not apply to other BlueCast resins. \u003c\/p\u003e\n\u003cp\u003eBlueCast X-Filigree resin is fully compatible with the new monochromatic LCD Generation and DLP printers. \u003c\/p\u003e\n\u003ch4\u003eMain features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCreate Jewelry with unmatched precision\u003c\/li\u003e\n\u003cli\u003eNo bleeding, zero shrinkage, low viscosity even at low temperatures\u003c\/li\u003e\n\u003cli\u003eIdeal printing properties suitable for light jewelry with sharp details, micro-pave, highly detailed parts and filigree\u003c\/li\u003e\n\u003cli\u003eStrong platform adhesion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn old RGB LCD machines the exposure times are much more longer than standard resins. With some COB LED machines the resin may not work.\u003c\/p\u003e\n\u003cp\u003eIn order to get the maximum details use of HD FEP or No-FEP are strongly suggested. A bad quality FEP compromise the resin printability.\u003c\/p\u003e\n\u003cp\u003eBefore run the Z-Axis calibration, please check if your build platform is planar. The colored platform coating like the one of the old Anycubic Photon or Elegoo Mars inhibits the sticking of the castable resins. To fix this machine issues you can sand the build platform with 150\/200 grade sandpaper.\u003c\/p\u003e\n\u003cp\u003ePerform z-axis calibration following the manufacturer's instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore use we suggest to heat the resin by microwave ovens (NEVER OVER 30 SECONDS), ultrasonic cleaner, hot air, etc. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore pour the resin into the resin tank shake the bottle for one minute.\u003c\/p\u003e\n\u003cp\u003eFor a correct debubbling let the resin rest in to the resin tank for 5 minutes before start the print. To speed up the operations you can also filter the resin in order to remove the air bubbles or or vacuum the opened bottle.\u003c\/p\u003e\n\u003cp\u003eNot filter the resin after each print and not heating the resin before each print may lead to printing failures. Do not store the resin in to the tank. Please remove the resin from printer tank, filter it and store in to the original bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE THE EXPOSURE TIME CAN CHANGE BY 30% IN ACCORDING TO THE MANUFACTURER LED CALIBRATION, TO THE USED FEP AND TO THE PRINTER EFFICIENCY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRINTING SETTINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe don’t provide official after sales service for the machines not listed below. The settings are specifically developed for Chitubox slicer.\u003c\/p\u003e\n\u003cp\u003eANYCUBIC MONO\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.05 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 15 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 25 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min ® 3\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC MONO SE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.03 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 10 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 5.2 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 15 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC MONO X\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.03 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 15 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 8.5 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC MONO 4K\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.03 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 15 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4 ®\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eANYCUBIC PHOTON S\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.05 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 12 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 19 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 45 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 8 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 70 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 70 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: OFF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePHROZEN SONIC MINI 4K\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.035 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 6.5 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 12 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003ePHROZEN SONIC MINI 8K\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.030 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 8 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003ePHROZEN SONIC 4K ® 5\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.035 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 6.0 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 12 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 100 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePHROZEN SONIC 4K XL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLayer Height: 0.05 mm\u003c\/p\u003e\n\u003cp\u003eBottom Layer Count: 25 n\u003c\/p\u003e\n\u003cp\u003eExposure Time: 5.5 s\u003c\/p\u003e\n\u003cp\u003eBottom Exposure Time: 20 s\u003c\/p\u003e\n\u003cp\u003eLight-off Delay: 7 s\u003c\/p\u003e\n\u003cp\u003eBottom light-off delay: 13 s\u003c\/p\u003e\n\u003cp\u003eBottom Lift Distance: 5 mm\u003c\/p\u003e\n\u003cp\u003eLifting Distance: 4 mm\u003c\/p\u003e\n\u003cp\u003eBottom Lift Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eLifting Speed: 50 mm\/min\u003c\/p\u003e\n\u003cp\u003eRetract Speed: 100mm\/min\u003c\/p\u003e\n\u003cp\u003eAntialiasing: ON\u003c\/p\u003e\n\u003cp\u003eAA Level: 8\u003c\/p\u003e\n\u003cp\u003eGray Level: 4\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8298227826886,"title":"BlueCast X-One V2 LCD\/DLP 500g","handle":"bluecast-x-one-v2-lcd-dlp-500g","description":"\u003ch1\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlueCast X-One V2 \u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe real meltable resin developed and produced by BlueCast for DLP and Monochromatic LCD machines. Thanks to the low temperature melting polymer it ensures smooth surface finish and perfect lettering. X-One was developed by BlueCast in order to allow perfect casting results with any kind of investments and burnout cycles. It is the first castable resin with 0% shrinkage and an extreme dimensional stability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eIt provides perfect casting results with any type of investments and burnout cycles. It is compatible with low-temperature burnout (although we recommend a last stage temperature of 700°C or 1292°F, everything is completely burned out at 650°C or 1202°F\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinally, you can cast any kind of pattern with text, engravings, micropavè, etc., in any casting house or service\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThere is no shrinkage at all\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt is free from toxic and carcinogenic components\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt emits low fumes during burnout and has very low VOC (volatile organic compound) levels, with a negligible smell\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThis resin is your best choice for solid parts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2prod testogradiente intoview clipreveal intoviewnow\"\u003eX-One V2 UPGRADES\u003c\/h2\u003e\n\u003cul class=\"xonev2ul\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame print profiles\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eas version V1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved resolution\u003c\/strong\u003e, especially for the new 12k printers. Better accuracy and reduced bleeding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced printability\u003c\/strong\u003e, particularly for DLP technology (no need for additives).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eat low temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved meltability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor micro-details and engravings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"chrome-extension:\/\/efaidnbmnnnibpcajpcglclefindmkaj\/https:\/\/www.bluecast.info\/upload\/download\/msds-bluecast-x-onepdf-6117106.pdf\" title=\"x-one v2 safety data sheet\" target=\"_blank\"\u003eDownload MSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_YPqJ27wyUQ?si=ybXuFQaTewED5o2s\" height=\"300\" width=\"500\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","published_at":"2024-11-05T13:08:03-05:00","created_at":"2024-08-19T15:55:37-04:00","vendor":"Blue Cast-3D Garage","type":"Resin","tags":["3D printer resin","500g","blue cast","bluecast","bluecast resin","bluecast x one","Bluecast x1","Business","cast","castable","castable resin","ceramic","customizer","DLP","jewelry","jewelry resin","LCD","lcd 500","new-arrivals","Resin","resin 3dprinter","SLA","wax","x-one v2","x1 v2"],"price":12500,"price_min":12500,"price_max":12500,"available":true,"price_varies":false,"compare_at_price":14700,"compare_at_price_min":14700,"compare_at_price_max":14700,"compare_at_price_varies":false,"variants":[{"id":44031153995974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC-XONE-V2-LCD-DLP-500G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BlueCast X-One V2 LCD\/DLP 500g","public_title":null,"options":["Default Title"],"price":12500,"weight":1000,"compare_at_price":14700,"inventory_management":"shopify","barcode":"32271334","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_9fd4691bdf294111994d9a96922e5d07_mv2_6b854fbd-3674-4941-94b4-eca6cea64eda.jpg?v=1724282280","\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_cab6fbccea454042900c844894cc5d8e_mv2_c8dab090-dd6d-47a1-82b4-d4738e1cd39e.jpg?v=1724282280","\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_38cc1e5eb91a424cbebb7458c09926fc_mv2_d132a20c-3f87-43c6-8e76-a72c96f274d4.jpg?v=1724282280","\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_a75fb3f41e504854aa1d42d921be705a_mv2_b313e139-2110-411c-be30-28dd36f3a866.jpg?v=1724282280","\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_44d8b99c73ba4d45810807379decd705_mv2_fdad4204-7399-447b-8d23-1295b30f97bc.jpg?v=1724282280"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_9fd4691bdf294111994d9a96922e5d07_mv2_6b854fbd-3674-4941-94b4-eca6cea64eda.jpg?v=1724282280","options":["Title"],"media":[{"alt":null,"id":30368148127942,"position":1,"preview_image":{"aspect_ratio":1.0,"height":420,"width":420,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_9fd4691bdf294111994d9a96922e5d07_mv2_6b854fbd-3674-4941-94b4-eca6cea64eda.jpg?v=1724282280"},"aspect_ratio":1.0,"height":420,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_9fd4691bdf294111994d9a96922e5d07_mv2_6b854fbd-3674-4941-94b4-eca6cea64eda.jpg?v=1724282280","width":420},{"alt":null,"id":30368148160710,"position":2,"preview_image":{"aspect_ratio":1.333,"height":390,"width":520,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_cab6fbccea454042900c844894cc5d8e_mv2_c8dab090-dd6d-47a1-82b4-d4738e1cd39e.jpg?v=1724282280"},"aspect_ratio":1.333,"height":390,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_cab6fbccea454042900c844894cc5d8e_mv2_c8dab090-dd6d-47a1-82b4-d4738e1cd39e.jpg?v=1724282280","width":520},{"alt":null,"id":30368148193478,"position":3,"preview_image":{"aspect_ratio":1.333,"height":390,"width":520,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_38cc1e5eb91a424cbebb7458c09926fc_mv2_d132a20c-3f87-43c6-8e76-a72c96f274d4.jpg?v=1724282280"},"aspect_ratio":1.333,"height":390,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_38cc1e5eb91a424cbebb7458c09926fc_mv2_d132a20c-3f87-43c6-8e76-a72c96f274d4.jpg?v=1724282280","width":520},{"alt":null,"id":30368148226246,"position":4,"preview_image":{"aspect_ratio":1.333,"height":390,"width":520,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_a75fb3f41e504854aa1d42d921be705a_mv2_b313e139-2110-411c-be30-28dd36f3a866.jpg?v=1724282280"},"aspect_ratio":1.333,"height":390,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_a75fb3f41e504854aa1d42d921be705a_mv2_b313e139-2110-411c-be30-28dd36f3a866.jpg?v=1724282280","width":520},{"alt":null,"id":30368148259014,"position":5,"preview_image":{"aspect_ratio":1.775,"height":293,"width":520,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_44d8b99c73ba4d45810807379decd705_mv2_fdad4204-7399-447b-8d23-1295b30f97bc.jpg?v=1724282280"},"aspect_ratio":1.775,"height":293,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3cfdd3_44d8b99c73ba4d45810807379decd705_mv2_fdad4204-7399-447b-8d23-1295b30f97bc.jpg?v=1724282280","width":520}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlueCast X-One V2 \u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe real meltable resin developed and produced by BlueCast for DLP and Monochromatic LCD machines. Thanks to the low temperature melting polymer it ensures smooth surface finish and perfect lettering. X-One was developed by BlueCast in order to allow perfect casting results with any kind of investments and burnout cycles. It is the first castable resin with 0% shrinkage and an extreme dimensional stability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eIt provides perfect casting results with any type of investments and burnout cycles. It is compatible with low-temperature burnout (although we recommend a last stage temperature of 700°C or 1292°F, everything is completely burned out at 650°C or 1202°F\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFinally, you can cast any kind of pattern with text, engravings, micropavè, etc., in any casting house or service\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThere is no shrinkage at all\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt is free from toxic and carcinogenic components\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt emits low fumes during burnout and has very low VOC (volatile organic compound) levels, with a negligible smell\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThis resin is your best choice for solid parts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2prod testogradiente intoview clipreveal intoviewnow\"\u003eX-One V2 UPGRADES\u003c\/h2\u003e\n\u003cul class=\"xonev2ul\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame print profiles\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eas version V1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved resolution\u003c\/strong\u003e, especially for the new 12k printers. Better accuracy and reduced bleeding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced printability\u003c\/strong\u003e, particularly for DLP technology (no need for additives).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased stability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eat low temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved meltability\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor micro-details and engravings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"chrome-extension:\/\/efaidnbmnnnibpcajpcglclefindmkaj\/https:\/\/www.bluecast.info\/upload\/download\/msds-bluecast-x-onepdf-6117106.pdf\" title=\"x-one v2 safety data sheet\" target=\"_blank\"\u003eDownload MSDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_YPqJ27wyUQ?si=ybXuFQaTewED5o2s\" height=\"300\" width=\"500\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e"}

{"id":8298217177286,"title":"Bluecast X10 - LCD\/DLP 500g","handle":"bluecast-x10-lcd-dlp-500g","description":"\u003ch3\u003e\u003cstrong\u003e\u003cspan lang=\"en-us\" xml:lang=\"en-us\"\u003eBLUE CAST X10\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eExcellent casting of small engravings both positive and negative.\u003c\/li\u003e\n\u003cli\u003eSuitable for all jewelry needs: from filigree to medals, as well from chaton settings to signet rings.  - Excellent for stones presetting (improved elasticity). - No smell.  - Negligible shrinkage (0.7% after 7 days). - Easy welding with wax.\u003c\/li\u003e\n\u003cli\u003eExcellent yield of details with all investments. No chemical aggression of the investment during burnout cycle. \u003c\/li\u003e\n\u003cli\u003ePossible manual finishing (post cure is needed).\u003c\/li\u003e\n\u003cli\u003eMonomers free.\u003c\/li\u003e\n\u003cli\u003eExtremely detailed.\u003c\/li\u003e\n\u003cli\u003eSmooth surfaces.\u003c\/li\u003e\n\u003cli\u003eBurnout cycle improved.\u003c\/li\u003e\n\u003cli\u003eSuitable for all fast burnout cycles.\u003c\/li\u003e\n\u003cli\u003eFull burnout also at lower temperature (740°C, flask).\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability in time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCastable: YES\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eCastability\u003c\/span\u003e: Excellent\u003c\/li\u003e\n\u003cli\u003eCastability improved\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensional stability improved\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilding platform adhesion improved \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for all kinds of jewelry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with: all SLA and DLP printers \u003c\/li\u003e\n\u003cli\u003eWashing mode: Ethyl \/ IPA alcohol 30 seconds _ Drying with compressed air\u003c\/li\u003e\n\u003cli\u003eUV care: Not needed\u003c\/li\u003e\n\u003cli\u003eShrinkage: Negligible\u003c\/li\u003e\n\u003cli\u003eColor: Green\u003c\/li\u003e\n\u003cli\u003eSize: 250 - 500 gr\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBlueCast X10 for SLA\/DLP 3d printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eCompatible with\u003c\/span\u003e: all SLA and DLP printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBlueCast X10 for LCD\/DLP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eCompatible with\u003c\/span\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eall LCD printers like \u003c\/span\u003e\u003cspan\u003eWanaho D7\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eAnycubic 3d\u003c\/span\u003e\u003cspan\u003e, ZORTRAX, Prusa, Phrozen,\u003c\/span\u003e\u003cspan\u003eMicromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power)\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/bluecast-x10-customizer-lcd-dlp-sharpenizer\"\u003e\u003cstrong\u003eCustomizers also available\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-11-05T13:08:01-05:00","created_at":"2024-08-19T15:54:53-04:00","vendor":"Blue Cast-3D Garage","type":"Resin","tags":["3D printer resin","500g","blue cast","bluecast","bluecast resin","Business","cast","ceramic","customizer","lcd","lcd 500","offer","Resin","resin 3dprinter","SLA","wax","x 10","x10"],"price":9000,"price_min":9000,"price_max":9000,"available":true,"price_varies":false,"compare_at_price":12500,"compare_at_price_min":12500,"compare_at_price_max":12500,"compare_at_price_varies":false,"variants":[{"id":44031135187142,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC-X10-LCD-DLP-500G","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bluecast X10 - LCD\/DLP 500g","public_title":null,"options":["Default Title"],"price":9000,"weight":2000,"compare_at_price":12500,"inventory_management":"shopify","barcode":"11005043","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/bluecast-x10-resin-lcddlp_09545694-f66e-4481-baa6-2f138fdeb98c.jpg?v=1724288328"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/bluecast-x10-resin-lcddlp_09545694-f66e-4481-baa6-2f138fdeb98c.jpg?v=1724288328","options":["Title"],"media":[{"alt":"Bluecast X10 - LCD\/DLP 500g - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368453329094,"position":1,"preview_image":{"aspect_ratio":0.938,"height":959,"width":900,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/bluecast-x10-resin-lcddlp_09545694-f66e-4481-baa6-2f138fdeb98c.jpg?v=1724288328"},"aspect_ratio":0.938,"height":959,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/bluecast-x10-resin-lcddlp_09545694-f66e-4481-baa6-2f138fdeb98c.jpg?v=1724288328","width":900}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3\u003e\u003cstrong\u003e\u003cspan lang=\"en-us\" xml:lang=\"en-us\"\u003eBLUE CAST X10\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eExcellent casting of small engravings both positive and negative.\u003c\/li\u003e\n\u003cli\u003eSuitable for all jewelry needs: from filigree to medals, as well from chaton settings to signet rings.  - Excellent for stones presetting (improved elasticity). - No smell.  - Negligible shrinkage (0.7% after 7 days). - Easy welding with wax.\u003c\/li\u003e\n\u003cli\u003eExcellent yield of details with all investments. No chemical aggression of the investment during burnout cycle. \u003c\/li\u003e\n\u003cli\u003ePossible manual finishing (post cure is needed).\u003c\/li\u003e\n\u003cli\u003eMonomers free.\u003c\/li\u003e\n\u003cli\u003eExtremely detailed.\u003c\/li\u003e\n\u003cli\u003eSmooth surfaces.\u003c\/li\u003e\n\u003cli\u003eBurnout cycle improved.\u003c\/li\u003e\n\u003cli\u003eSuitable for all fast burnout cycles.\u003c\/li\u003e\n\u003cli\u003eFull burnout also at lower temperature (740°C, flask).\u003c\/li\u003e\n\u003cli\u003eExcellent dimensional stability in time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCastable: YES\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eCastability\u003c\/span\u003e: Excellent\u003c\/li\u003e\n\u003cli\u003eCastability improved\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensional stability improved\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilding platform adhesion improved \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for all kinds of jewelry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with: all SLA and DLP printers \u003c\/li\u003e\n\u003cli\u003eWashing mode: Ethyl \/ IPA alcohol 30 seconds _ Drying with compressed air\u003c\/li\u003e\n\u003cli\u003eUV care: Not needed\u003c\/li\u003e\n\u003cli\u003eShrinkage: Negligible\u003c\/li\u003e\n\u003cli\u003eColor: Green\u003c\/li\u003e\n\u003cli\u003eSize: 250 - 500 gr\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBlueCast X10 for SLA\/DLP 3d printers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eCompatible with\u003c\/span\u003e: all SLA and DLP printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBlueCast X10 for LCD\/DLP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eCompatible with\u003c\/span\u003e:\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eall LCD printers like \u003c\/span\u003e\u003cspan\u003eWanaho D7\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eAnycubic 3d\u003c\/span\u003e\u003cspan\u003e, ZORTRAX, Prusa, Phrozen,\u003c\/span\u003e\u003cspan\u003eMicromake L2, X-Cube, Xayav V etc. (405 nm with 30 watt led or higher power)\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.digitmakers.ca\/products\/bluecast-x10-customizer-lcd-dlp-sharpenizer\"\u003e\u003cstrong\u003eCustomizers also available\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8298210984134,"title":"Bluecast X10 Customizer LCD\/DLP - Sharpenizer","handle":"bluecast-x10-customizer-lcd-dlp-sharpenizer","description":"\u003cp\u003eCUSTOMIZER FOR\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/spool3d.ca\/bluecast-x10\/\"\u003eX10 LCD\/DLP\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to the Customizers, you can create your ideal resin.\u003c\/p\u003e\n\u003cp\u003eJust add a bottle of CUSTOMIZER to an X10 LCD \/ DLP resin 500g bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHARPENIZER\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- for incredible details and sharp edges\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSOFTENIZER\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- soft parts for easier stone pre-setting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDENIZER\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- for extreme filigree and perfect dental structure\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 50 gram bottle of chosen X10 Customizer\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2024-11-05T13:02:51-05:00","created_at":"2024-08-19T15:54:28-04:00","vendor":"Blue Cast-3D Garage","type":"Resin","tags":["3D printer resin","blue cast","bluecast","bluecast customizer","bluecast resin","Business","cast","new-arrivals","offer","Resin","resin 3dprinter","sharpeniser","sharpenizer","SLA","vustomizer","wax","wax resin","x 10","x10"],"price":1700,"price_min":1700,"price_max":1700,"available":true,"price_varies":false,"compare_at_price":2100,"compare_at_price_min":2100,"compare_at_price_max":2100,"compare_at_price_varies":false,"variants":[{"id":44031123587270,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC-X10-CS-SRZR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bluecast X10 Customizer LCD\/DLP - Sharpenizer","public_title":null,"options":["Default Title"],"price":1700,"weight":1000,"compare_at_price":2100,"inventory_management":"shopify","barcode":"11005044","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/Capture_0c1288f6-bceb-4545-b674-40b97fe81986.png?v=1724288325"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/Capture_0c1288f6-bceb-4545-b674-40b97fe81986.png?v=1724288325","options":["Title"],"media":[{"alt":"Bluecast X10 Customizer LCD\/DLP - Sharpenizer - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368452903110,"position":1,"preview_image":{"aspect_ratio":0.751,"height":461,"width":346,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Capture_0c1288f6-bceb-4545-b674-40b97fe81986.png?v=1724288325"},"aspect_ratio":0.751,"height":461,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Capture_0c1288f6-bceb-4545-b674-40b97fe81986.png?v=1724288325","width":346}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCUSTOMIZER FOR\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/spool3d.ca\/bluecast-x10\/\"\u003eX10 LCD\/DLP\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to the Customizers, you can create your ideal resin.\u003c\/p\u003e\n\u003cp\u003eJust add a bottle of CUSTOMIZER to an X10 LCD \/ DLP resin 500g bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHARPENIZER\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- for incredible details and sharp edges\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSOFTENIZER\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- soft parts for easier stone pre-setting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHARDENIZER\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- for extreme filigree and perfect dental structure\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 50 gram bottle of chosen X10 Customizer\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8298237821126,"title":"Clearance ESUN Resin - PLA PRO Resin 500g - various colors","handle":"clearance-esun-resin-pla-pro-resin-500g-various-colors","description":"\u003ch2 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eThese resins have been tested and are in perfect condition. Its been put on clearance due to high inventory. \u003c\/span\u003e\u003c\/h2\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h1\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eeSUN PLA PRO\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis resin has excellent resolution and is suitable for making props and dental models that require high resolution.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis product has the following characteristics:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental, bio-based\u003c\/li\u003e\n\u003cli\u003eHigh strength and toughness, balanced performance\u003c\/li\u003e\n\u003cli\u003eHigh precision, high resolution\u003c\/li\u003e\n\u003cli\u003eCompatible with color screen, monochrome (4K) screen, large and small size printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll levels (5 levels of score):\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eStrength（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eToughness （F）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eForming (P）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eAccuracy（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eSpeed (A）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\" nowrap\u003e\n\u003cp align=\"center\"\u003eeResin-PLA Pro\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eTensile Strength (MPa）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e37-48\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eFlexural Strength (Mpa)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e36-49\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eElongation at Break(%)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e25-28%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e     IZOD Impact Strength\/(J\/m）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e32-36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eHardness(Shore D)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e78-80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eViscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e200-300\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eDensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e1.09-1.10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" style=\"width: 477.797px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"width: 458.797px;\"\u003e\n\u003cp align=\"center\"\u003e Printing parameters\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003eProject\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e Printer model\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eLow light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e Medium light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e High light intensity (black and white screen)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Representative Printer\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd rowspan=\"3\" style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eAnyCubic Photon, Nova Bene 1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd rowspan=\"3\" style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 3.0, Nova Bene 4, Wanhao D7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd rowspan=\"3\" style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 13.3, Phrozen Sonic Mini 2K\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Normal exposure time\/s\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e13-14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e6-7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e2.0-4.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Number of bottom layers\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e3-5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Bottom exposure time\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e≥30\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting distance\/mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" rowspan=\"2\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e 5.5\u0026amp;6 inches: 5-6 or higher\u003c\/p\u003e\n\u003cp align=\"center\"\u003e8.9\u0026amp;13.3 inches: 8-12 or higher\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e90-150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e90-120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e50-90\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lowering speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e150-200\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with color screen, black and white screen, large and small size printers\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.esun3d.net\/UploadFiles\/Product\/2020\/09\/20200921114001755295982.jpg\" alt=\"eResin-PLA Pro 易生LCD13.3 4K Print application\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2024-10-30T15:31:51-04:00","created_at":"2024-08-19T15:56:35-04:00","vendor":"ESUN","type":"Resin","tags":["1000g","1kg resin","3D printer resin","boxing","clearance","eresin","esun","esun eresin","esun PLA pro","esun resin","instock","New","New Arrival","new-arrivals","offer","pla pro","pla pro resin","Resin","resin 3dprinter"],"price":700,"price_min":700,"price_max":700,"available":true,"price_varies":false,"compare_at_price":1800,"compare_at_price_min":1800,"compare_at_price_max":1800,"compare_at_price_varies":false,"variants":[{"id":44031175590086,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"CLRNCE-ESUN-RSN-PLAPRO-BLACK","requires_shipping":true,"taxable":true,"featured_image":{"id":37586665832646,"product_id":8298237821126,"position":1,"created_at":"2024-08-21T19:14:32-04:00","updated_at":"2024-08-21T19:14:32-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_35c50542-ea56-41dd-b8a5-18850bc62ce7.jpg?v=1724282072","variant_ids":[44031175590086]},"available":false,"name":"Clearance ESUN Resin - PLA PRO Resin 500g - various colors - Black","public_title":"Black","options":["Black"],"price":700,"weight":1000,"compare_at_price":1800,"inventory_management":"shopify","barcode":"X002Q0QC0F","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135479494,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_35c50542-ea56-41dd-b8a5-18850bc62ce7.jpg?v=1724282072"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031175622854,"title":"Grey","option1":"Grey","option2":null,"option3":null,"sku":"CLRNCE-ESUN-RSN-PLAPRO-GREY","requires_shipping":true,"taxable":true,"featured_image":{"id":37586665865414,"product_id":8298237821126,"position":2,"created_at":"2024-08-21T19:14:32-04:00","updated_at":"2024-08-21T19:14:32-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_1edd7dca-68e0-49da-a12d-d69f9b59b04d.jpg?v=1724282072","variant_ids":[44031175622854]},"available":false,"name":"Clearance ESUN Resin - PLA PRO Resin 500g - various colors - Grey","public_title":"Grey","options":["Grey"],"price":700,"weight":1000,"compare_at_price":1800,"inventory_management":"shopify","barcode":"X002Q0UOTF","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135512262,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_1edd7dca-68e0-49da-a12d-d69f9b59b04d.jpg?v=1724282072"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031175655622,"title":"Beige","option1":"Beige","option2":null,"option3":null,"sku":"CLRNCE-ESUN-RSN-PLAPRO-BEIGE","requires_shipping":true,"taxable":true,"featured_image":{"id":37586665930950,"product_id":8298237821126,"position":4,"created_at":"2024-08-21T19:14:32-04:00","updated_at":"2024-08-21T19:14:32-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_bdbb79a4-69ad-42ce-a71e-aa59ce96f411.jpg?v=1724282072","variant_ids":[44031175655622]},"available":true,"name":"Clearance ESUN Resin - PLA PRO Resin 500g - various colors - Beige","public_title":"Beige","options":["Beige"],"price":700,"weight":1000,"compare_at_price":1800,"inventory_management":"shopify","barcode":"X002Q0QC19","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135577798,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_bdbb79a4-69ad-42ce-a71e-aa59ce96f411.jpg?v=1724282072"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031175688390,"title":"White","option1":"White","option2":null,"option3":null,"sku":"CLRNCE-ESUN-RSN-PLAPRO-WHITE","requires_shipping":true,"taxable":true,"featured_image":{"id":37586665898182,"product_id":8298237821126,"position":3,"created_at":"2024-08-21T19:14:32-04:00","updated_at":"2024-08-21T19:14:32-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_b48726e1-b15e-4b1c-99a6-79ab232955b8.jpg?v=1724282072","variant_ids":[44031175688390]},"available":false,"name":"Clearance ESUN Resin - PLA PRO Resin 500g - various colors - White","public_title":"White","options":["White"],"price":700,"weight":1000,"compare_at_price":1800,"inventory_management":"shopify","barcode":"X002Q0QC05","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135545030,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_b48726e1-b15e-4b1c-99a6-79ab232955b8.jpg?v=1724282072"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/black_35c50542-ea56-41dd-b8a5-18850bc62ce7.jpg?v=1724282072","\/\/digitmakers.com\/cdn\/shop\/files\/grey_1edd7dca-68e0-49da-a12d-d69f9b59b04d.jpg?v=1724282072","\/\/digitmakers.com\/cdn\/shop\/files\/white_b48726e1-b15e-4b1c-99a6-79ab232955b8.jpg?v=1724282072","\/\/digitmakers.com\/cdn\/shop\/files\/beige_bdbb79a4-69ad-42ce-a71e-aa59ce96f411.jpg?v=1724282072"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/black_35c50542-ea56-41dd-b8a5-18850bc62ce7.jpg?v=1724282072","options":["Color"],"media":[{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135479494,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_35c50542-ea56-41dd-b8a5-18850bc62ce7.jpg?v=1724282072"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_35c50542-ea56-41dd-b8a5-18850bc62ce7.jpg?v=1724282072","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135512262,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_1edd7dca-68e0-49da-a12d-d69f9b59b04d.jpg?v=1724282072"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_1edd7dca-68e0-49da-a12d-d69f9b59b04d.jpg?v=1724282072","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135545030,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_b48726e1-b15e-4b1c-99a6-79ab232955b8.jpg?v=1724282072"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_b48726e1-b15e-4b1c-99a6-79ab232955b8.jpg?v=1724282072","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368135577798,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_bdbb79a4-69ad-42ce-a71e-aa59ce96f411.jpg?v=1724282072"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_bdbb79a4-69ad-42ce-a71e-aa59ce96f411.jpg?v=1724282072","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eThese resins have been tested and are in perfect condition. Its been put on clearance due to high inventory. \u003c\/span\u003e\u003c\/h2\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h1\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eeSUN PLA PRO\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis resin has excellent resolution and is suitable for making props and dental models that require high resolution.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis product has the following characteristics:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental, bio-based\u003c\/li\u003e\n\u003cli\u003eHigh strength and toughness, balanced performance\u003c\/li\u003e\n\u003cli\u003eHigh precision, high resolution\u003c\/li\u003e\n\u003cli\u003eCompatible with color screen, monochrome (4K) screen, large and small size printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll levels (5 levels of score):\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eStrength（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eToughness （F）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eForming (P）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eAccuracy（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eSpeed (A）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\" nowrap\u003e\n\u003cp align=\"center\"\u003eeResin-PLA Pro\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eTensile Strength (MPa）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e37-48\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eFlexural Strength (Mpa)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e36-49\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eElongation at Break(%)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e25-28%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e     IZOD Impact Strength\/(J\/m）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e32-36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eHardness(Shore D)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e78-80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eViscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e200-300\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eDensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e1.09-1.10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" style=\"width: 477.797px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"width: 458.797px;\"\u003e\n\u003cp align=\"center\"\u003e Printing parameters\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003eProject\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e Printer model\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eLow light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e Medium light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e High light intensity (black and white screen)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Representative Printer\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd rowspan=\"3\" style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eAnyCubic Photon, Nova Bene 1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd rowspan=\"3\" style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 3.0, Nova Bene 4, Wanhao D7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd rowspan=\"3\" style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 13.3, Phrozen Sonic Mini 2K\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Normal exposure time\/s\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e13-14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e6-7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e2.0-4.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Number of bottom layers\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e3-5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Bottom exposure time\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e≥30\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting distance\/mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" rowspan=\"2\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e 5.5\u0026amp;6 inches: 5-6 or higher\u003c\/p\u003e\n\u003cp align=\"center\"\u003e8.9\u0026amp;13.3 inches: 8-12 or higher\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e90-150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e90-120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e50-90\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lowering speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd colspan=\"3\" style=\"width: 447.797px;\"\u003e\n\u003cp align=\"center\"\u003e150-200\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with color screen, black and white screen, large and small size printers\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.esun3d.net\/UploadFiles\/Product\/2020\/09\/20200921114001755295982.jpg\" alt=\"eResin-PLA Pro 易生LCD13.3 4K Print application\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e"}

{"id":8298240049350,"title":"Clearance ESUN Water Washable Resin For LCD Printer 500g - various colors","handle":"clearance-esun-water-washable-resin-for-lcd-printer-500g-various-colors","description":"\u003ch2 data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eThese resins have been tested and are in perfect condition. Its been put on clearance due to high inventory. \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSpecifically designed for LCD\/LED light source to achieve better printing quality.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eWater Washable Hard Resin, Compatible to most LCD printers using 405 nm wavelength light\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstead of using IPA to clean up the prints, you can use tap water to wash the prints.  Note that you still need to leave the water outside under sunlight to cure any resins.  Don't drain to sink directly.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eFaster Printing Speed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eLow Odor\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/eSUN-MSDS_water_washable_resin_resin_1.pdf?1023\"\u003e\u003cspan class=\"a-list-item\"\u003eMSDS Specifications for Water Washable Resin\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4NiNl9K2C7o\" height=\"500\" width=\"300\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWater washable resin has strength and property of standard rein, various colour, excellent materials for artware and proofing of product research, Low odor and low irritation, The printed model can washed and cleaned by water directly, Safety and Eco-friendly, High surface precision, as well excellent material for school and family education\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"Water Washable ESUN resin for lcd 3d printer, 3d filament canada digitmakers\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/14bab9adf92448c9b014b7a71b7611e5_480x480.jpg?v=1576600219\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"water washable esun resin digitmakers canada 3d printers 3d filaments 3d scanners\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/d64cde03003c41d399cba533cc0bde04_480x480.jpg?v=1576600394\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"water washable esun 3d resin digitmakers 3d printers 3d filaments 3d scanners\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/f0e2e1a3f1284ef8b2972eeabffbfc21_480x480.jpg?v=1576600434\"\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003e ESUN MSDS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/eSUN-MSDS_water_washable_resin_resin_1.pdf?1023\"\u003e Click here to view ESUN MSDS\u003c\/a\u003e\u003c\/p\u003e","published_at":"2024-10-30T15:31:53-04:00","created_at":"2024-08-19T15:56:47-04:00","vendor":"ESUN","type":"Resin","tags":["3D printer resin","boxing","boxing day","clearance","esun","esun water washable","esun water washable resin","instock","offer","Resin","water washable","water washable resin"],"price":1400,"price_min":1400,"price_max":1400,"available":true,"price_varies":false,"compare_at_price":2400,"compare_at_price_min":2400,"compare_at_price_max":2400,"compare_at_price_varies":false,"variants":[{"id":44031180308678,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"CLRNCE-ESUN-WTR-WSHBLE-500G-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":37586664685766,"product_id":8298240049350,"position":3,"created_at":"2024-08-21T19:14:24-04:00","updated_at":"2024-08-21T19:14:24-04:00","alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/5_606e28fc-0d68-4e1d-9734-11b0f6f0c846.jpg?v=1724282064","variant_ids":[44031180308678]},"available":true,"name":"Clearance ESUN Water Washable Resin For LCD Printer 500g - various colors - Black","public_title":"Black","options":["Black"],"price":1400,"weight":700,"compare_at_price":2400,"inventory_management":"shopify","barcode":"X002Q0QE1R","featured_media":{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134725830,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/5_606e28fc-0d68-4e1d-9734-11b0f6f0c846.jpg?v=1724282064"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031180341446,"title":"Clear","option1":"Clear","option2":null,"option3":null,"sku":"CLRNCE-ESUN-WTR-WSHBLE-500G-CLR","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Clearance ESUN Water Washable Resin For LCD Printer 500g - various colors - Clear","public_title":"Clear","options":["Clear"],"price":1400,"weight":700,"compare_at_price":2400,"inventory_management":"shopify","barcode":"X002Q0QC0P","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031180374214,"title":"White","option1":"White","option2":null,"option3":null,"sku":"CLRNCE-ESUN-WTR-WSHBLE-500G-WHITE","requires_shipping":true,"taxable":true,"featured_image":{"id":37586664652998,"product_id":8298240049350,"position":2,"created_at":"2024-08-21T19:14:24-04:00","updated_at":"2024-08-21T19:14:24-04:00","alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3_405c6278-5628-4b30-8716-1d50cf04b330.jpg?v=1724282064","variant_ids":[44031180374214]},"available":true,"name":"Clearance ESUN Water Washable Resin For LCD Printer 500g - various colors - White","public_title":"White","options":["White"],"price":1400,"weight":700,"compare_at_price":2400,"inventory_management":"shopify","barcode":"X002Q16ORP","featured_media":{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134693062,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3_405c6278-5628-4b30-8716-1d50cf04b330.jpg?v=1724282064"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/esun-water-washable-resin-500g_0ffe0281-64e0-43f6-8a87-87de74dd44ab.jpg?v=1724282064","\/\/digitmakers.com\/cdn\/shop\/files\/3_405c6278-5628-4b30-8716-1d50cf04b330.jpg?v=1724282064","\/\/digitmakers.com\/cdn\/shop\/files\/5_606e28fc-0d68-4e1d-9734-11b0f6f0c846.jpg?v=1724282064","\/\/digitmakers.com\/cdn\/shop\/files\/8_9b44f025-91e8-4dce-960f-6ac47ec660a4.jpg?v=1724282064","\/\/digitmakers.com\/cdn\/shop\/files\/9_307f5466-cef0-4d75-9c5f-aa2eaa9dd10f.jpg?v=1724282064","\/\/digitmakers.com\/cdn\/shop\/files\/10_4aac01e2-3fcd-4e38-b571-da0867ed450f.jpg?v=1724282064","\/\/digitmakers.com\/cdn\/shop\/files\/11_080c1335-daf4-4544-af1a-cf9ff5af9e7d.jpg?v=1724282064","\/\/digitmakers.com\/cdn\/shop\/files\/26b42396c90648da95fb9b89e13e4827_1_f3348fba-a1aa-4450-a92f-1d0c32b76a67.jpg?v=1724282064"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-water-washable-resin-500g_0ffe0281-64e0-43f6-8a87-87de74dd44ab.jpg?v=1724282064","options":["Color"],"media":[{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca","id":30368134660294,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-water-washable-resin-500g_0ffe0281-64e0-43f6-8a87-87de74dd44ab.jpg?v=1724282064"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-water-washable-resin-500g_0ffe0281-64e0-43f6-8a87-87de74dd44ab.jpg?v=1724282064","width":1000},{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134693062,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3_405c6278-5628-4b30-8716-1d50cf04b330.jpg?v=1724282064"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3_405c6278-5628-4b30-8716-1d50cf04b330.jpg?v=1724282064","width":1000},{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134725830,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/5_606e28fc-0d68-4e1d-9734-11b0f6f0c846.jpg?v=1724282064"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/5_606e28fc-0d68-4e1d-9734-11b0f6f0c846.jpg?v=1724282064","width":1000},{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134758598,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/8_9b44f025-91e8-4dce-960f-6ac47ec660a4.jpg?v=1724282064"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/8_9b44f025-91e8-4dce-960f-6ac47ec660a4.jpg?v=1724282064","width":1000},{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134791366,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/9_307f5466-cef0-4d75-9c5f-aa2eaa9dd10f.jpg?v=1724282064"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/9_307f5466-cef0-4d75-9c5f-aa2eaa9dd10f.jpg?v=1724282064","width":1000},{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134824134,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/10_4aac01e2-3fcd-4e38-b571-da0867ed450f.jpg?v=1724282064"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/10_4aac01e2-3fcd-4e38-b571-da0867ed450f.jpg?v=1724282064","width":1000},{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134856902,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/11_080c1335-daf4-4544-af1a-cf9ff5af9e7d.jpg?v=1724282064"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/11_080c1335-daf4-4544-af1a-cf9ff5af9e7d.jpg?v=1724282064","width":1000},{"alt":"ESUN Water Washable Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368134889670,"position":8,"preview_image":{"aspect_ratio":0.575,"height":1200,"width":690,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/26b42396c90648da95fb9b89e13e4827_1_f3348fba-a1aa-4450-a92f-1d0c32b76a67.jpg?v=1724282064"},"aspect_ratio":0.575,"height":1200,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/26b42396c90648da95fb9b89e13e4827_1_f3348fba-a1aa-4450-a92f-1d0c32b76a67.jpg?v=1724282064","width":690}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2 data-mce-fragment=\"1\" style=\"text-align: center;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eThese resins have been tested and are in perfect condition. Its been put on clearance due to high inventory. \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSpecifically designed for LCD\/LED light source to achieve better printing quality.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eWater Washable Hard Resin, Compatible to most LCD printers using 405 nm wavelength light\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInstead of using IPA to clean up the prints, you can use tap water to wash the prints.  Note that you still need to leave the water outside under sunlight to cure any resins.  Don't drain to sink directly.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eFaster Printing Speed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eLow Odor\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/eSUN-MSDS_water_washable_resin_resin_1.pdf?1023\"\u003e\u003cspan class=\"a-list-item\"\u003eMSDS Specifications for Water Washable Resin\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4NiNl9K2C7o\" height=\"500\" width=\"300\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWater washable resin has strength and property of standard rein, various colour, excellent materials for artware and proofing of product research, Low odor and low irritation, The printed model can washed and cleaned by water directly, Safety and Eco-friendly, High surface precision, as well excellent material for school and family education\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"Water Washable ESUN resin for lcd 3d printer, 3d filament canada digitmakers\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/14bab9adf92448c9b014b7a71b7611e5_480x480.jpg?v=1576600219\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"water washable esun resin digitmakers canada 3d printers 3d filaments 3d scanners\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/d64cde03003c41d399cba533cc0bde04_480x480.jpg?v=1576600394\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"water washable esun 3d resin digitmakers 3d printers 3d filaments 3d scanners\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/f0e2e1a3f1284ef8b2972eeabffbfc21_480x480.jpg?v=1576600434\"\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003e ESUN MSDS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/eSUN-MSDS_water_washable_resin_resin_1.pdf?1023\"\u003e Click here to view ESUN MSDS\u003c\/a\u003e\u003c\/p\u003e"}

{"id":8298197123270,"title":"DLP SLA Resin Metal Filter","handle":"dlp-sla-resin-metal-filter","description":"\u003cp\u003e\u003cspan\u003eThis metal filter helps to clean excess resin from your SLA\/DLP prints. Using high quality materials for the filter, small fragments will be separated when pouring back into the bottle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApproximate Dimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHeight : 36mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTop diameter : 47mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBottom diameter : 32mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFilter diameter: 23mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-11-05T13:02:48-05:00","created_at":"2024-08-19T15:53:44-04:00","vendor":"GENERIC","type":"Accessories","tags":["3D printer resin","filter","Metal","Resin"],"price":400,"price_min":400,"price_max":400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031090098374,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-RS-MT-FLTR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"DLP SLA Resin Metal Filter","public_title":null,"options":["Default Title"],"price":400,"weight":500,"compare_at_price":null,"inventory_management":"shopify","barcode":"15000051","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/ResinFilter_b5144971-aaf1-48c1-bc42-efc7259ae319.jpg?v=1724289176"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/ResinFilter_b5144971-aaf1-48c1-bc42-efc7259ae319.jpg?v=1724289176","options":["Title"],"media":[{"alt":"DLP SLA Resin Metal Filter - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368514146502,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/ResinFilter_b5144971-aaf1-48c1-bc42-efc7259ae319.jpg?v=1724289176"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/ResinFilter_b5144971-aaf1-48c1-bc42-efc7259ae319.jpg?v=1724289176","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThis metal filter helps to clean excess resin from your SLA\/DLP prints. Using high quality materials for the filter, small fragments will be separated when pouring back into the bottle. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApproximate Dimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHeight : 36mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTop diameter : 47mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBottom diameter : 32mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFilter diameter: 23mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8298209509574,"title":"ESUN eResin - PLA PRO Resin 1000g - various colors","handle":"esun-eresin-pla-pro-resin-1000g-various-colors","description":"\u003cp data-mce-fragment=\"1\"\u003eThe eSUN PLA PRO resin has excellent resolution and is suitable for making props and dental models that require high resolution.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis product has the following characteristics:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental, bio-based\u003c\/li\u003e\n\u003cli\u003eHigh strength and toughness, balanced performance\u003c\/li\u003e\n\u003cli\u003eHigh precision, high resolution\u003c\/li\u003e\n\u003cli\u003eCompatible with color screen, monochrome (4K) screen, large and small size printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll levels (5 levels of score):\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eStrength（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eToughness （F）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eForming (P）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eAccuracy（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eSpeed (A）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd nowrap style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003eeResin-PLA Pro\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eTensile Strength (MPa）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e37-48\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eFlexural Strength (Mpa)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e36-49\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eElongation at Break(%)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e25-28%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e     IZOD Impact Strength\/(J\/m）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e32-36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eHardness(Shore D)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e78-80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eViscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e200-300\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eDensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e1.09-1.10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 477.797px;\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 458.797px;\" colspan=\"4\"\u003e\n\u003cp align=\"center\"\u003e Printing parameters\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003eProject\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Printer model\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eLow light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e Medium light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e High light intensity (black and white screen)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Representative Printer\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eAnyCubic Photon, Nova Bene 1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 3.0, Nova Bene 4, Wanhao D7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 13.3, Phrozen Sonic Mini 2K\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Normal exposure time\/s\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e13-14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e6-7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e2.0-4.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Number of bottom layers\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e3-5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Bottom exposure time\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e≥30\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003e Lifting distance\/mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" rowspan=\"2\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e 5.5\u0026amp;6 inches: 5-6 or higher\u003c\/p\u003e\n\u003cp align=\"center\"\u003e8.9\u0026amp;13.3 inches: 8-12 or higher\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e90-150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e90-120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e50-90\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lowering speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e150-200\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCompatible with color screen, black and white screen, large and small size printers\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"eResin-PLA Pro 易生LCD13.3 4K Print application\" src=\"https:\/\/www.esun3d.net\/UploadFiles\/Product\/2020\/09\/20200921114001755295982.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-10-29T17:48:55-04:00","created_at":"2024-08-19T15:54:20-04:00","vendor":"ESUN","type":"Resin","tags":["1000g","1kg resin","3D printer resin","bio-based","boxing","boxing day","eresin","esun","esun eresin","esun PLA pro","esun resin","instock","New","New Arrival","new-arrivals","photopolymer resin","pla pro","pla pro resin","Resin","resin 3dprinter"],"price":1900,"price_min":1900,"price_max":1900,"available":true,"price_varies":false,"compare_at_price":2800,"compare_at_price_min":2800,"compare_at_price_max":2800,"compare_at_price_varies":false,"variants":[{"id":44031120343238,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-1KG-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967920838,"product_id":8298209509574,"position":4,"created_at":"2024-08-21T20:34:46-04:00","updated_at":"2024-08-21T20:34:46-04:00","alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_1f6237f9-1dcf-49a8-a022-f628ab139b4c.jpg?v=1724286886","variant_ids":[44031120343238]},"available":true,"name":"ESUN eResin - PLA PRO Resin 1000g - various colors - Black","public_title":"Black","options":["Black"],"price":1900,"weight":1500,"compare_at_price":2800,"inventory_management":"shopify","barcode":"6922572200784","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388317382,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_1f6237f9-1dcf-49a8-a022-f628ab139b4c.jpg?v=1724286886"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031120376006,"title":"White","option1":"White","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-1KG-WHT","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967855302,"product_id":8298209509574,"position":2,"created_at":"2024-08-21T20:34:46-04:00","updated_at":"2024-08-21T20:34:46-04:00","alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_bd662245-214e-45cd-94a7-e43f210799a8.jpg?v=1724286886","variant_ids":[44031120376006]},"available":true,"name":"ESUN eResin - PLA PRO Resin 1000g - various colors - White","public_title":"White","options":["White"],"price":1900,"weight":1500,"compare_at_price":2800,"inventory_management":"shopify","barcode":"6922572200821","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388251846,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_bd662245-214e-45cd-94a7-e43f210799a8.jpg?v=1724286886"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031120408774,"title":"Grey","option1":"Grey","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-1KG-GRY","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967822534,"product_id":8298209509574,"position":1,"created_at":"2024-08-21T20:34:46-04:00","updated_at":"2024-08-21T20:34:46-04:00","alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_7b60c50f-1c05-43cc-8185-357349a39610.jpg?v=1724286886","variant_ids":[44031120408774]},"available":true,"name":"ESUN eResin - PLA PRO Resin 1000g - various colors - Grey","public_title":"Grey","options":["Grey"],"price":1900,"weight":1500,"compare_at_price":2800,"inventory_management":"shopify","barcode":"6922572200241","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388219078,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_7b60c50f-1c05-43cc-8185-357349a39610.jpg?v=1724286886"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031120441542,"title":"Beige","option1":"Beige","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-1KG-BGE","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967888070,"product_id":8298209509574,"position":3,"created_at":"2024-08-21T20:34:46-04:00","updated_at":"2024-08-21T20:34:46-04:00","alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_f7714318-8398-4b6f-b476-c3e5e1da2fe7.jpg?v=1724286886","variant_ids":[44031120441542]},"available":true,"name":"ESUN eResin - PLA PRO Resin 1000g - various colors - Beige","public_title":"Beige","options":["Beige"],"price":1900,"weight":1500,"compare_at_price":2800,"inventory_management":"shopify","barcode":"6922572200807","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388284614,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_f7714318-8398-4b6f-b476-c3e5e1da2fe7.jpg?v=1724286886"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/grey_7b60c50f-1c05-43cc-8185-357349a39610.jpg?v=1724286886","\/\/digitmakers.com\/cdn\/shop\/files\/white_bd662245-214e-45cd-94a7-e43f210799a8.jpg?v=1724286886","\/\/digitmakers.com\/cdn\/shop\/files\/beige_f7714318-8398-4b6f-b476-c3e5e1da2fe7.jpg?v=1724286886","\/\/digitmakers.com\/cdn\/shop\/files\/black_1f6237f9-1dcf-49a8-a022-f628ab139b4c.jpg?v=1724286886"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_7b60c50f-1c05-43cc-8185-357349a39610.jpg?v=1724286886","options":["Color"],"media":[{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388219078,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_7b60c50f-1c05-43cc-8185-357349a39610.jpg?v=1724286886"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_7b60c50f-1c05-43cc-8185-357349a39610.jpg?v=1724286886","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388251846,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_bd662245-214e-45cd-94a7-e43f210799a8.jpg?v=1724286886"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_bd662245-214e-45cd-94a7-e43f210799a8.jpg?v=1724286886","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388284614,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_f7714318-8398-4b6f-b476-c3e5e1da2fe7.jpg?v=1724286886"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_f7714318-8398-4b6f-b476-c3e5e1da2fe7.jpg?v=1724286886","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 1000g - various colors - Digitmakers.ca","id":30368388317382,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_1f6237f9-1dcf-49a8-a022-f628ab139b4c.jpg?v=1724286886"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_1f6237f9-1dcf-49a8-a022-f628ab139b4c.jpg?v=1724286886","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eThe eSUN PLA PRO resin has excellent resolution and is suitable for making props and dental models that require high resolution.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis product has the following characteristics:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental, bio-based\u003c\/li\u003e\n\u003cli\u003eHigh strength and toughness, balanced performance\u003c\/li\u003e\n\u003cli\u003eHigh precision, high resolution\u003c\/li\u003e\n\u003cli\u003eCompatible with color screen, monochrome (4K) screen, large and small size printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll levels (5 levels of score):\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eStrength（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eToughness （F）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eForming (P）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eAccuracy（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eSpeed (A）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd nowrap style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003eeResin-PLA Pro\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eTensile Strength (MPa）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e37-48\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eFlexural Strength (Mpa)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e36-49\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eElongation at Break(%)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e25-28%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e     IZOD Impact Strength\/(J\/m）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e32-36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eHardness(Shore D)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e78-80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eViscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e200-300\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eDensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e1.09-1.10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 477.797px;\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 458.797px;\" colspan=\"4\"\u003e\n\u003cp align=\"center\"\u003e Printing parameters\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003eProject\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Printer model\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eLow light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e Medium light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e High light intensity (black and white screen)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Representative Printer\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eAnyCubic Photon, Nova Bene 1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 3.0, Nova Bene 4, Wanhao D7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 13.3, Phrozen Sonic Mini 2K\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Normal exposure time\/s\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e13-14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e6-7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e2.0-4.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Number of bottom layers\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e3-5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Bottom exposure time\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e≥30\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003e Lifting distance\/mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" rowspan=\"2\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e 5.5\u0026amp;6 inches: 5-6 or higher\u003c\/p\u003e\n\u003cp align=\"center\"\u003e8.9\u0026amp;13.3 inches: 8-12 or higher\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e90-150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e90-120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e50-90\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lowering speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e150-200\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCompatible with color screen, black and white screen, large and small size printers\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"eResin-PLA Pro 易生LCD13.3 4K Print application\" src=\"https:\/\/www.esun3d.net\/UploadFiles\/Product\/2020\/09\/20200921114001755295982.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8298223534278,"title":"ESUN eResin - PLA PRO Resin 500g - various colors","handle":"esun-eresin-pla-pro-resin-500g-various-colors","description":"\u003cp data-mce-fragment=\"1\"\u003eThe eSUN PLA PRO resin has excellent resolution and is suitable for making props and dental models that require high resolution.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis product has the following characteristics:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental, bio-based\u003c\/li\u003e\n\u003cli\u003eHigh strength and toughness, balanced performance\u003c\/li\u003e\n\u003cli\u003eHigh precision, high resolution\u003c\/li\u003e\n\u003cli\u003eCompatible with color screen, monochrome (4K) screen, large and small size printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll levels (5 levels of score):\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eStrength（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eToughness （F）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eForming (P）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eAccuracy（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eSpeed (A）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd nowrap style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003eeResin-PLA Pro\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eTensile Strength (MPa）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e37-48\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eFlexural Strength (Mpa)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e36-49\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eElongation at Break(%)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e25-28%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e     IZOD Impact Strength\/(J\/m）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e32-36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eHardness(Shore D)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e78-80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eViscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e200-300\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eDensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e1.09-1.10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 477.797px;\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 458.797px;\" colspan=\"4\"\u003e\n\u003cp align=\"center\"\u003e Printing parameters\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003eProject\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Printer model\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eLow light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e Medium light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e High light intensity (black and white screen)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Representative Printer\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eAnyCubic Photon, Nova Bene 1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 3.0, Nova Bene 4, Wanhao D7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 13.3, Phrozen Sonic Mini 2K\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Normal exposure time\/s\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e13-14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e6-7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e2.0-4.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Number of bottom layers\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e3-5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Bottom exposure time\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e≥30\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003e Lifting distance\/mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" rowspan=\"2\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e 5.5\u0026amp;6 inches: 5-6 or higher\u003c\/p\u003e\n\u003cp align=\"center\"\u003e8.9\u0026amp;13.3 inches: 8-12 or higher\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e90-150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e90-120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e50-90\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lowering speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e150-200\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCompatible with color screen, black and white screen, large and small size printers\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"eResin-PLA Pro 易生LCD13.3 4K Print application\" src=\"https:\/\/www.esun3d.net\/UploadFiles\/Product\/2020\/09\/20200921114001755295982.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-10-30T13:07:19-04:00","created_at":"2024-08-19T15:55:21-04:00","vendor":"ESUN","type":"Resin","tags":["1000g","1kg resin","3D printer resin","boxing","eresin","esun","esun eresin","esun PLA pro","esun resin","instock","New","New Arrival","new-arrivals","offer","pla pro","pla pro resin","Resin","resin 3dprinter"],"price":1800,"price_min":1800,"price_max":1800,"available":true,"price_varies":false,"compare_at_price":2300,"compare_at_price_min":2300,"compare_at_price_max":2300,"compare_at_price_varies":false,"variants":[{"id":44031146492102,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-500G-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967691462,"product_id":8298223534278,"position":1,"created_at":"2024-08-21T20:34:40-04:00","updated_at":"2024-08-21T20:34:40-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_54f984ca-b76f-4716-b23d-8f0dd78fb115.jpg?v=1724286880","variant_ids":[44031146492102]},"available":true,"name":"ESUN eResin - PLA PRO Resin 500g - various colors - Black","public_title":"Black","options":["Black"],"price":1800,"weight":1000,"compare_at_price":2300,"inventory_management":"shopify","barcode":"6922572200791","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368387956934,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_54f984ca-b76f-4716-b23d-8f0dd78fb115.jpg?v=1724286880"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031146524870,"title":"Grey","option1":"Grey","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-500G-GRY","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967724230,"product_id":8298223534278,"position":2,"created_at":"2024-08-21T20:34:40-04:00","updated_at":"2024-08-21T20:34:40-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_d1aa7bc6-1471-48ba-aaaf-be16fed5ad58.jpg?v=1724286880","variant_ids":[44031146524870]},"available":true,"name":"ESUN eResin - PLA PRO Resin 500g - various colors - Grey","public_title":"Grey","options":["Grey"],"price":1800,"weight":1000,"compare_at_price":2300,"inventory_management":"shopify","barcode":"6922572200234","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368387989702,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_d1aa7bc6-1471-48ba-aaaf-be16fed5ad58.jpg?v=1724286880"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031146557638,"title":"Beige","option1":"Beige","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-500G-BGE","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967789766,"product_id":8298223534278,"position":4,"created_at":"2024-08-21T20:34:40-04:00","updated_at":"2024-08-21T20:34:40-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_48d79084-84bf-4b7b-969e-d45111ca9894.jpg?v=1724286880","variant_ids":[44031146557638]},"available":true,"name":"ESUN eResin - PLA PRO Resin 500g - various colors - Beige","public_title":"Beige","options":["Beige"],"price":1800,"weight":1000,"compare_at_price":2300,"inventory_management":"shopify","barcode":"6922572200654","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368388055238,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_48d79084-84bf-4b7b-969e-d45111ca9894.jpg?v=1724286880"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031146590406,"title":"White","option1":"White","option2":null,"option3":null,"sku":"ESUN-RS-PLA-PRO-500G-WHT","requires_shipping":true,"taxable":true,"featured_image":{"id":37586967756998,"product_id":8298223534278,"position":3,"created_at":"2024-08-21T20:34:40-04:00","updated_at":"2024-08-21T20:34:40-04:00","alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","width":1500,"height":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_aa14c123-42e9-46cc-b50b-6f73d97cb00b.jpg?v=1724286880","variant_ids":[44031146590406]},"available":true,"name":"ESUN eResin - PLA PRO Resin 500g - various colors - White","public_title":"White","options":["White"],"price":1800,"weight":1000,"compare_at_price":2300,"inventory_management":"shopify","barcode":"6922572200838","featured_media":{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368388022470,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_aa14c123-42e9-46cc-b50b-6f73d97cb00b.jpg?v=1724286880"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/black_54f984ca-b76f-4716-b23d-8f0dd78fb115.jpg?v=1724286880","\/\/digitmakers.com\/cdn\/shop\/files\/grey_d1aa7bc6-1471-48ba-aaaf-be16fed5ad58.jpg?v=1724286880","\/\/digitmakers.com\/cdn\/shop\/files\/white_aa14c123-42e9-46cc-b50b-6f73d97cb00b.jpg?v=1724286880","\/\/digitmakers.com\/cdn\/shop\/files\/beige_48d79084-84bf-4b7b-969e-d45111ca9894.jpg?v=1724286880"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/black_54f984ca-b76f-4716-b23d-8f0dd78fb115.jpg?v=1724286880","options":["Color"],"media":[{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368387956934,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_54f984ca-b76f-4716-b23d-8f0dd78fb115.jpg?v=1724286880"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/black_54f984ca-b76f-4716-b23d-8f0dd78fb115.jpg?v=1724286880","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368387989702,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_d1aa7bc6-1471-48ba-aaaf-be16fed5ad58.jpg?v=1724286880"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/grey_d1aa7bc6-1471-48ba-aaaf-be16fed5ad58.jpg?v=1724286880","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368388022470,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_aa14c123-42e9-46cc-b50b-6f73d97cb00b.jpg?v=1724286880"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/white_aa14c123-42e9-46cc-b50b-6f73d97cb00b.jpg?v=1724286880","width":1500},{"alt":"ESUN eResin - PLA PRO Resin 500g - various colors - Digitmakers.ca","id":30368388055238,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_48d79084-84bf-4b7b-969e-d45111ca9894.jpg?v=1724286880"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/beige_48d79084-84bf-4b7b-969e-d45111ca9894.jpg?v=1724286880","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eThe eSUN PLA PRO resin has excellent resolution and is suitable for making props and dental models that require high resolution.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis product has the following characteristics:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental, bio-based\u003c\/li\u003e\n\u003cli\u003eHigh strength and toughness, balanced performance\u003c\/li\u003e\n\u003cli\u003eHigh precision, high resolution\u003c\/li\u003e\n\u003cli\u003eCompatible with color screen, monochrome (4K) screen, large and small size printers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll levels (5 levels of score):\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eStrength（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eToughness （F）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eForming (P）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eAccuracy（S）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e4.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.4364%;\" data-mce-style=\"width: 49.4364%;\"\u003e\n\u003cp align=\"center\"\u003eSpeed (A）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.5636%;\" data-mce-style=\"width: 48.5636%;\"\u003e\n\u003cp align=\"center\"\u003e3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd nowrap style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003eeResin-PLA Pro\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eTensile Strength (MPa）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e37-48\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eFlexural Strength (Mpa)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e36-49\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eElongation at Break(%)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e25-28%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003e     IZOD Impact Strength\/(J\/m）\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e32-36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eHardness(Shore D)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e78-80\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eViscosity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e200-300\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.2246%;\"\u003e\n\u003cp align=\"center\"\u003eDensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 48.7754%;\"\u003e\n\u003cp align=\"center\"\u003e1.09-1.10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrinting parameters:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 477.797px;\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 458.797px;\" colspan=\"4\"\u003e\n\u003cp align=\"center\"\u003e Printing parameters\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003eProject\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Printer model\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003eLow light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e Medium light intensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e High light intensity (black and white screen)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e Representative Printer\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eAnyCubic Photon, Nova Bene 1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 3.0, Nova Bene 4, Wanhao D7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\" rowspan=\"3\"\u003e\n\u003cp align=\"center\"\u003eeSUN LCD 13.3, Phrozen Sonic Mini 2K\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Normal exposure time\/s\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e13-14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e6-7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e2.0-4.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Number of bottom layers\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e3-5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Bottom exposure time\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e≥60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e≥30\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\" rowspan=\"2\"\u003e\n\u003cp align=\"center\"\u003e Lifting distance\/mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" rowspan=\"2\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e 5.5\u0026amp;6 inches: 5-6 or higher\u003c\/p\u003e\n\u003cp align=\"center\"\u003e8.9\u0026amp;13.3 inches: 8-12 or higher\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lifting speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 85px;\"\u003e\n\u003cp align=\"center\"\u003e90-150\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 110px;\"\u003e\n\u003cp align=\"center\"\u003e90-120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 252.797px;\"\u003e\n\u003cp align=\"center\"\u003e50-90\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 11px;\"\u003e\n\u003cp align=\"center\"\u003e Lowering speed\/mm·min-1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 447.797px;\" colspan=\"3\"\u003e\n\u003cp align=\"center\"\u003e150-200\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCompatible with color screen, black and white screen, large and small size printers\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"eResin-PLA Pro 易生LCD13.3 4K Print application\" src=\"https:\/\/www.esun3d.net\/UploadFiles\/Product\/2020\/09\/20200921114001755295982.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8298203152582,"title":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors","handle":"esun-hard-tough-resin-abs-like-for-lcd-printer-500g-various-colors","description":"\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThis is a resin with high physical strength, high hardness and high toughness similar to ABS filament. Experiments have shown that the 3D model produced by eSUN's Hard-Tough Resin product, such as the carrier gear, can withstand high impact forces and other high-strength mechanical pressures. While using electric drills to test the toughness of the resin, there's no breakage on the model even after a few drills. For the application field, the material needs to have extremely high stress and strain performance, and that's why eSUN developed Hard-Tough Resin.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eHard-Tough Resin is a urethane acrylate photocurable resin suitable for LCD printers. To ensure the good quality and stability, eSUN is fully formulated with high quality imported raw materials with the following advantages:\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigh impact strength;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigher shock resistance than normal resin;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eRigid resin, excellent mechanical properties such as hardness, tensile and bending;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigh surface hardness and wear resistance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/7981a4b20c034564bb040e4ee2028673_480x480.jpg?v=1595532237\" width=\"480x480\" height=\"480x480\" style=\"margin-right: -66px; float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/11790219b5064f2c9fee4001716dc0db_480x480.jpg?v=1595532468\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Setting:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eApplicable wavelength: 395-405nm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOperating temperature: 18-35 ° C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eExposure time: 20-30s on the bottom layer, 8s on the normal layer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePls adjust the setting until you get the best print performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eInstructions for use:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(1) Before use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eShake the liquid resin before use;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePls wear gloves and stay in ventilated environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(2) When using:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnscrew the cap and add it to the resin tank according to the equipment requirements;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSelect the correct print parameters and settings for printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(3) After use:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (≥95%), lactate or isopropyl alcohol cleaning solution; high pressure mercury lamp or LED lamp (launch peak is between 360-405 nm); oven.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(4) Post-processing steps:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA. Remove the printed model from the molding platform with a blade;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eB, Submerge the model in the cleaning solution, rinsed or ultrasonically washed for 1 minute, then taken out and drained;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eC. Submerge the model completely in distilled water, uniformly irradiated with high-pressure mercury lamp, LED lamp, or exposed to sunlight;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eD, Place the model in an oven, set to heat at 50℃ for 20 minutes, and then naturally cooled to room temperature;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eE. Proper processing, such as removing support, polishing, coloring, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHard-tough Resin:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"329\" src=\"https:\/\/www.youtube.com\/embed\/xtaSReXFac8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePrecautions:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e1. Seal at room temperature and protect from light to avoid high temperature or sunlight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2, the recommended temperature is 18-35 ° C, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 60 ° C).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. If the resin pigment settles, it can be used after stirring or shaking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing, so it is recommended that:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(1) The intensity of mercury lamp or LED light source is 5-10mW\/m2, and the duration is no more than 1 hour (self-regulation);\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(2) The exposure time in the sun (summer) is around 1 hour;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003cem\u003eMaterial properties will vary depending on the molding equipment, post-cure method and testing equipment.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2024-10-30T15:31:38-04:00","created_at":"2024-08-19T15:53:52-04:00","vendor":"ESUN","type":"Resin","tags":["3D printer resin","boxing","boxing day","esun","esun hard resin","esun water washable","hard resin","hard tough","hard tough resin","hobby","instock","New","New Arrival","new-arrivals","Resin","resin 3dprinter"],"price":3200,"price_min":3200,"price_max":3200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031103598790,"title":"White","option1":"White","option2":null,"option3":null,"sku":"ESUN-HRS-500G-WHT","requires_shipping":true,"taxable":true,"featured_image":{"id":37587031720134,"product_id":8298203152582,"position":4,"created_at":"2024-08-21T20:50:49-04:00","updated_at":"2024-08-21T20:50:49-04:00","alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-3_6d851a1b-0ae6-417a-9ae8-f5e4ae1e936b.jpg?v=1724287849","variant_ids":[44031103598790]},"available":true,"name":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - White","public_title":"White","options":["White"],"price":3200,"weight":1000,"compare_at_price":null,"inventory_management":"shopify","barcode":"6922572278790","featured_media":{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439206086,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-3_6d851a1b-0ae6-417a-9ae8-f5e4ae1e936b.jpg?v=1724287849"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031103631558,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"ESUN-HRS-500G-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":37587031785670,"product_id":8298203152582,"position":6,"created_at":"2024-08-21T20:50:49-04:00","updated_at":"2024-08-21T20:50:49-04:00","alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-1_2c76e269-2621-4849-ae68-e80fc5b24476.jpg?v=1724287849","variant_ids":[44031103631558]},"available":true,"name":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Black","public_title":"Black","options":["Black"],"price":3200,"weight":1000,"compare_at_price":null,"inventory_management":"shopify","barcode":"6922572278752","featured_media":{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439271622,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-1_2c76e269-2621-4849-ae68-e80fc5b24476.jpg?v=1724287849"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031103664326,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"ESUN-HRS-500G-BLU","requires_shipping":true,"taxable":true,"featured_image":{"id":37587031752902,"product_id":8298203152582,"position":5,"created_at":"2024-08-21T20:50:49-04:00","updated_at":"2024-08-21T20:50:49-04:00","alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":1000,"height":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/1KG-2_bfa1d3f5-85ff-46b9-8b58-dc1f9e195324.jpg?v=1724287849","variant_ids":[44031103664326]},"available":true,"name":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Blue","public_title":"Blue","options":["Blue"],"price":3200,"weight":1000,"compare_at_price":null,"inventory_management":"shopify","barcode":"6922572278424","featured_media":{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439238854,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/1KG-2_bfa1d3f5-85ff-46b9-8b58-dc1f9e195324.jpg?v=1724287849"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031103697094,"title":"Grey","option1":"Grey","option2":null,"option3":null,"sku":"ESUN-HRS-500G-GRY","requires_shipping":true,"taxable":true,"featured_image":{"id":37587031883974,"product_id":8298203152582,"position":9,"created_at":"2024-08-21T20:50:49-04:00","updated_at":"2024-08-21T20:50:49-04:00","alt":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Digitmakers.ca","width":1000,"height":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey-1_6d2a0013-ef83-46d2-9348-b5cf23cc0b12.jpg?v=1724287849","variant_ids":[44031103697094]},"available":true,"name":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Grey","public_title":"Grey","options":["Grey"],"price":3200,"weight":1000,"compare_at_price":null,"inventory_management":"shopify","barcode":"36664482","featured_media":{"alt":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Digitmakers.ca","id":30368439369926,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey-1_6d2a0013-ef83-46d2-9348-b5cf23cc0b12.jpg?v=1724287849"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/Esun-hard-tough-resin-500g_b8ebc62c-322d-4206-ba49-97165862fa3b.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/3_80a4eb5e-af0a-4ec4-8949-d575e3a5c2d5.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/10_c2b251eb-544e-4f24-b029-2d3711c0032b.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-3_6d851a1b-0ae6-417a-9ae8-f5e4ae1e936b.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/1KG-2_bfa1d3f5-85ff-46b9-8b58-dc1f9e195324.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-1_2c76e269-2621-4849-ae68-e80fc5b24476.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey_83afdb63-f470-45be-b4ba-2a51dab349d5.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey_075d8a36-dc0f-44ea-a3b6-dddffe0bf633.jpg?v=1724287849","\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey-1_6d2a0013-ef83-46d2-9348-b5cf23cc0b12.jpg?v=1724287849"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/Esun-hard-tough-resin-500g_b8ebc62c-322d-4206-ba49-97165862fa3b.jpg?v=1724287849","options":["Color"],"media":[{"alt":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Digitmakers.ca","id":30368439107782,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Esun-hard-tough-resin-500g_b8ebc62c-322d-4206-ba49-97165862fa3b.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Esun-hard-tough-resin-500g_b8ebc62c-322d-4206-ba49-97165862fa3b.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439140550,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3_80a4eb5e-af0a-4ec4-8949-d575e3a5c2d5.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3_80a4eb5e-af0a-4ec4-8949-d575e3a5c2d5.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439173318,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/10_c2b251eb-544e-4f24-b029-2d3711c0032b.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/10_c2b251eb-544e-4f24-b029-2d3711c0032b.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439206086,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-3_6d851a1b-0ae6-417a-9ae8-f5e4ae1e936b.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-3_6d851a1b-0ae6-417a-9ae8-f5e4ae1e936b.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439238854,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/1KG-2_bfa1d3f5-85ff-46b9-8b58-dc1f9e195324.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/1KG-2_bfa1d3f5-85ff-46b9-8b58-dc1f9e195324.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-tough Resin For LCD Printer 500g - various colors - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368439271622,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-1_2c76e269-2621-4849-ae68-e80fc5b24476.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/0.5KG-1_2c76e269-2621-4849-ae68-e80fc5b24476.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Digitmakers.ca","id":30368439304390,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey_83afdb63-f470-45be-b4ba-2a51dab349d5.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey_83afdb63-f470-45be-b4ba-2a51dab349d5.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Digitmakers.ca","id":30368439337158,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey_075d8a36-dc0f-44ea-a3b6-dddffe0bf633.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey_075d8a36-dc0f-44ea-a3b6-dddffe0bf633.jpg?v=1724287849","width":1000},{"alt":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors - Digitmakers.ca","id":30368439369926,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey-1_6d2a0013-ef83-46d2-9348-b5cf23cc0b12.jpg?v=1724287849"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/esun-hard-tough-resin-grey-1_6d2a0013-ef83-46d2-9348-b5cf23cc0b12.jpg?v=1724287849","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThis is a resin with high physical strength, high hardness and high toughness similar to ABS filament. Experiments have shown that the 3D model produced by eSUN's Hard-Tough Resin product, such as the carrier gear, can withstand high impact forces and other high-strength mechanical pressures. While using electric drills to test the toughness of the resin, there's no breakage on the model even after a few drills. For the application field, the material needs to have extremely high stress and strain performance, and that's why eSUN developed Hard-Tough Resin.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eHard-Tough Resin is a urethane acrylate photocurable resin suitable for LCD printers. To ensure the good quality and stability, eSUN is fully formulated with high quality imported raw materials with the following advantages:\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigh impact strength;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigher shock resistance than normal resin;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eRigid resin, excellent mechanical properties such as hardness, tensile and bending;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigh surface hardness and wear resistance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/7981a4b20c034564bb040e4ee2028673_480x480.jpg?v=1595532237\" width=\"480x480\" height=\"480x480\" style=\"margin-right: -66px; float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/11790219b5064f2c9fee4001716dc0db_480x480.jpg?v=1595532468\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Setting:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eApplicable wavelength: 395-405nm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOperating temperature: 18-35 ° C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eExposure time: 20-30s on the bottom layer, 8s on the normal layer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePls adjust the setting until you get the best print performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eInstructions for use:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(1) Before use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eShake the liquid resin before use;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePls wear gloves and stay in ventilated environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(2) When using:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnscrew the cap and add it to the resin tank according to the equipment requirements;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSelect the correct print parameters and settings for printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(3) After use:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (≥95%), lactate or isopropyl alcohol cleaning solution; high pressure mercury lamp or LED lamp (launch peak is between 360-405 nm); oven.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(4) Post-processing steps:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA. Remove the printed model from the molding platform with a blade;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eB, Submerge the model in the cleaning solution, rinsed or ultrasonically washed for 1 minute, then taken out and drained;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eC. Submerge the model completely in distilled water, uniformly irradiated with high-pressure mercury lamp, LED lamp, or exposed to sunlight;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eD, Place the model in an oven, set to heat at 50℃ for 20 minutes, and then naturally cooled to room temperature;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eE. Proper processing, such as removing support, polishing, coloring, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHard-tough Resin:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"329\" src=\"https:\/\/www.youtube.com\/embed\/xtaSReXFac8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePrecautions:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e1. Seal at room temperature and protect from light to avoid high temperature or sunlight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2, the recommended temperature is 18-35 ° C, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 60 ° C).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. If the resin pigment settles, it can be used after stirring or shaking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing, so it is recommended that:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(1) The intensity of mercury lamp or LED light source is 5-10mW\/m2, and the duration is no more than 1 hour (self-regulation);\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(2) The exposure time in the sun (summer) is around 1 hour;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003cem\u003eMaterial properties will vary depending on the molding equipment, post-cure method and testing equipment.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":8298234872006,"title":"ESUN MA100 Matte Resin - 1kg - White Clay","handle":"esun-ma100-matte-resin-1kg-white-clay","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh-precision matte resin is a type of matte resin with extremely high detail reproduction accuracy. Its high molding precision allows figurine models to faithfully replicate the original design, and its matte texture gives figurine models perfect expressiveness. This resin has low viscosity, good flowability, and is easy to print, while also offering some flexibility. It is suitable for use with various 405nm wavelength LCD\/DLP devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures: \u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eAchieves the highest level of detail reproduction for prints.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eMatte texture with a smooth and delicate surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eLow viscosity, excellent flowability, and easy to print.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eAction Figure Models\u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003ePrototype Design\u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eAesthetic Ornaments\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eParameter Information: \u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/www.esun3d.com\/uploads\/%E6%89%93%E5%8D%B0%E5%8F%82%E6%95%B0en.png\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eSample Prints\u003c\/span\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/cdnus.globalso.com\/esun3d\/600X388.jpg\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-10-30T15:31:49-04:00","created_at":"2024-08-19T15:56:07-04:00","vendor":"ESUN","type":"Resin","tags":["3D printer resin","Digitmakers.ca","esun","esun water washable","esun water washable resin","instock","ma100","matte resin","newfront","Resin","Shopify Collective","water washable","water washable resin"],"price":4200,"price_min":4200,"price_max":4200,"available":true,"price_varies":false,"compare_at_price":2400,"compare_at_price_min":2400,"compare_at_price_max":2400,"compare_at_price_varies":false,"variants":[{"id":44031169265862,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ESUN-MA100-RSN-WHITECLAY","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"ESUN MA100 Matte Resin - 1kg - White Clay","public_title":null,"options":["Default Title"],"price":4200,"weight":1500,"compare_at_price":2400,"inventory_management":"shopify","barcode":"6922572204812","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/White-clay.jpg?v=1724097369"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/White-clay.jpg?v=1724097369","options":["Title"],"media":[{"alt":null,"id":30360842436806,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/White-clay.jpg?v=1724097369"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/White-clay.jpg?v=1724097369","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHigh-precision matte resin is a type of matte resin with extremely high detail reproduction accuracy. Its high molding precision allows figurine models to faithfully replicate the original design, and its matte texture gives figurine models perfect expressiveness. This resin has low viscosity, good flowability, and is easy to print, while also offering some flexibility. It is suitable for use with various 405nm wavelength LCD\/DLP devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures: \u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eAchieves the highest level of detail reproduction for prints.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eMatte texture with a smooth and delicate surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eLow viscosity, excellent flowability, and easy to print.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eAction Figure Models\u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003ePrototype Design\u003c\/span\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eAesthetic Ornaments\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eParameter Information: \u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/www.esun3d.com\/uploads\/%E6%89%93%E5%8D%B0%E5%8F%82%E6%95%B0en.png\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003eSample Prints\u003c\/span\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/cdnus.globalso.com\/esun3d\/600X388.jpg\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8298226811078,"title":"ESUN PW100 PLA Water Washable Resin 0.5kg - various colors","handle":"esun-pw100-pla-water-washable-resin-0-5kg-various-colors","description":"\u003cp\u003e\u003cspan\u003eCombining the advantages of eSUN’s own PLA polyol, a bio based \u003c\/span\u003e\u003cstrong\u003ewater washable resin\u003c\/strong\u003e\u003cspan\u003e for ordinary consumers contains bio based components, is compatible with color screens, black and white screens, large and small size printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-5b951ea1c460f\" data-node=\"5b951ea1c460f\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv class=\"fl-col-group fl-node-5b951ea1c4c6a\" data-node=\"5b951ea1c4c6a\"\u003e\n\u003cdiv class=\"fl-col fl-node-5b951ea1c4e58\" data-node=\"5b951ea1c4e58\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-61138bc21a557\" data-node=\"61138bc21a557\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eDescription\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col-group fl-node-63ad06c68e207\" data-node=\"63ad06c68e207\"\u003e\n\u003cdiv class=\"fl-col fl-node-63ad06c68e5a6\" data-node=\"63ad06c68e5a6\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-6335014b29f80\" data-node=\"6335014b29f80\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003ePW100 PLA Water Washable Resin has good toughness, low odor, and a smooth printed surface. It can be washed with water, eliminating alcohol cleaning steps, greatly reducing post-processing time, improving printing efficiency and cost-effective.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-61138bf4047ac\" data-node=\"61138bf4047ac\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv class=\"fl-col-group fl-node-61138e649c2cc\" data-node=\"61138e649c2cc\"\u003e\n\u003cdiv class=\"fl-col fl-node-61138e649c5c9\" data-node=\"61138e649c5c9\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-61138bf404a33\" data-node=\"61138bf404a33\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eSellingpoint\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col-group fl-node-61138bf4049b6\" data-node=\"61138bf4049b6\"\u003e\n\u003cdiv class=\"fl-col fl-node-61138bf4049f5 fl-col-small\" data-node=\"61138bf4049f5\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-61138bf404a63\" data-node=\"61138bf404a63\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eLow odor\u003c\/p\u003e\n\u003cp\u003eWashable\u003c\/p\u003e\n\u003cp\u003eWide Compatibility\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col fl-node-61138e6932316 fl-col-small\" data-node=\"61138e6932316\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-61138e65d1757\" data-node=\"61138e65d1757\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eLow Viscosity\u003c\/p\u003e\n\u003cp\u003eHigh-precision\u003c\/p\u003e\n\u003cp\u003eBalance of strength, toughness and rigidity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"detail-tag-list\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"detail-tag-item\"\u003eEducation\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"detail-tag-item\"\u003eOrnament\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003eParameter Information\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003e 3D PRINTING PHOTOPOLYMER RESIN Properties Table\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/th\u003e\n\u003ctd\u003ePW100 PLA Water Washable Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity(mPa·s)\u003c\/th\u003e\n\u003ctd\u003e255-270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity(g\/cm\u003csup\u003e3\u003c\/sup\u003e)\u003c\/th\u003e\n\u003ctd\u003e1.09-1.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e45-55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at Break(%)\u003c\/th\u003e\n\u003ctd\u003e17-30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e45-55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact Strength(J\/m)\u003c\/th\u003e\n\u003ctd\u003e950-1050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTearing Strength(GPa)\u003c\/th\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Distortion Temp(℃)\u003c\/th\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness(Shore D)\u003c\/th\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eGrades (out of 10)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength（S）\u003c\/th\u003e\n\u003ctd\u003e 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eToughness（F）\u003c\/th\u003e\n\u003ctd\u003e 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForming（P）\u003c\/th\u003e\n\u003ctd\u003e 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy（S）\u003c\/th\u003e\n\u003ctd\u003e 9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eSpeed （A）\u003c\/p\u003e\n\u003c\/th\u003e\n\u003ctd\u003e 7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Sb606f307c5ea4b65b21ab1e0eb2cde53I.jpg\" width=\"544\" height=\"1684\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S3b665db824be4749b8c16dda7ed54d678.jpg\" width=\"543\" height=\"1351\"\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S7ae0ca2d3ac44b77a66ee8b8bb7248e4C.jpg\" width=\"540\" height=\"1803\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S467afe9f31e2463b97b0835786799b36M.jpg\" width=\"541\" height=\"1933\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003eNotes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Shake well before printing\u003c\/p\u003e\n\u003cp\u003e2. It is not suitable to wash the resin with water for a long time. It can be cleaned for tens of seconds to one minute. After cleaning, it is better to dry it with a hair dryer in time. When storing, it should not be placed in a humid and high temperature environment\u003c\/p\u003e\n\u003cp\u003e3. The waste water after cleaning should not be discharged directly. It is better to put it in a container under the sun so that the dissolved resin can be completely solidified before discharging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003ePrint Models\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg height=\"308\" width=\"548\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3602.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3602.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg height=\"309\" width=\"549\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3603.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3603.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg height=\"308\" width=\"547\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3605.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3605.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"304\" width=\"540\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3609.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3609.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-10-30T14:06:14-04:00","created_at":"2024-08-19T15:55:34-04:00","vendor":"ESUN","type":"Resin","tags":["0.5kg","1000g","1kg resin","3D printer resin","bio-based","boxing","boxing day","Digitmakers.ca","eresin","esun","esun 0.5 kg","esun 0.5kg","esun eresin","esun PLA pro","esun resin","instock","New","New Arrival","new front","new-arrivals","newfront","photopolymer resin","pla pro resin","PW100","PW100 PLA","PW100 PLA Water Washable","Resin","resin 3dprinter","Shopify Collective"],"price":1400,"price_min":1400,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":2100,"compare_at_price_min":2100,"compare_at_price_max":2100,"compare_at_price_varies":false,"variants":[{"id":44031152193734,"title":"Beige","option1":"Beige","option2":null,"option3":null,"sku":"ESUN-RS-PWPLA100-0.5KG-BGE","requires_shipping":true,"taxable":true,"featured_image":{"id":37577175728326,"product_id":8298226811078,"position":1,"created_at":"2024-08-19T15:55:35-04:00","updated_at":"2024-08-19T15:55:37-04:00","alt":null,"width":800,"height":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Beige.jpg?v=1724097337","variant_ids":[44031152193734]},"available":true,"name":"ESUN PW100 PLA Water Washable Resin 0.5kg - various colors - Beige","public_title":"Beige","options":["Beige"],"price":2100,"weight":1500,"compare_at_price":null,"inventory_management":"shopify","barcode":"6922572203082","featured_media":{"alt":null,"id":30360817238214,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Beige.jpg?v=1724097337"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031152226502,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"ESUN-RS-PWPLA100-0.5KG-BLK","requires_shipping":true,"taxable":true,"featured_image":{"id":37577175859398,"product_id":8298226811078,"position":2,"created_at":"2024-08-19T15:55:35-04:00","updated_at":"2024-08-19T15:55:37-04:00","alt":null,"width":800,"height":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Black.jpg?v=1724097337","variant_ids":[44031152226502]},"available":true,"name":"ESUN PW100 PLA Water Washable Resin 0.5kg - various colors - Black","public_title":"Black","options":["Black"],"price":2100,"weight":1500,"compare_at_price":null,"inventory_management":"shopify","barcode":"6922572203068","featured_media":{"alt":null,"id":30360817270982,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Black.jpg?v=1724097337"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031152259270,"title":"Grey","option1":"Grey","option2":null,"option3":null,"sku":"ESUN-RS-PWPLA100-05KG-GRY","requires_shipping":true,"taxable":true,"featured_image":{"id":37577176023238,"product_id":8298226811078,"position":3,"created_at":"2024-08-19T15:55:35-04:00","updated_at":"2024-08-19T15:55:37-04:00","alt":null,"width":800,"height":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Grey.jpg?v=1724097337","variant_ids":[44031152259270]},"available":true,"name":"ESUN PW100 PLA Water Washable Resin 0.5kg - various colors - Grey","public_title":"Grey","options":["Grey"],"price":1400,"weight":1500,"compare_at_price":2100,"inventory_management":"shopify","barcode":"6922572203112","featured_media":{"alt":null,"id":30360817303750,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Grey.jpg?v=1724097337"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031152292038,"title":"White","option1":"White","option2":null,"option3":null,"sku":"ESUN-RS-PWPLA100-0.5KG-WHT","requires_shipping":true,"taxable":true,"featured_image":{"id":37577175826630,"product_id":8298226811078,"position":4,"created_at":"2024-08-19T15:55:35-04:00","updated_at":"2024-08-19T15:55:37-04:00","alt":null,"width":800,"height":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-White.jpg?v=1724097337","variant_ids":[44031152292038]},"available":true,"name":"ESUN PW100 PLA Water Washable Resin 0.5kg - various colors - White","public_title":"White","options":["White"],"price":2100,"weight":1500,"compare_at_price":null,"inventory_management":"shopify","barcode":"6922572203051","featured_media":{"alt":null,"id":30360817336518,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-White.jpg?v=1724097337"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Beige.jpg?v=1724097337","\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Black.jpg?v=1724097337","\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Grey.jpg?v=1724097337","\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-White.jpg?v=1724097337"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Beige.jpg?v=1724097337","options":["Color"],"media":[{"alt":null,"id":30360817238214,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Beige.jpg?v=1724097337"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Beige.jpg?v=1724097337","width":800},{"alt":null,"id":30360817270982,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Black.jpg?v=1724097337"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Black.jpg?v=1724097337","width":800},{"alt":null,"id":30360817303750,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Grey.jpg?v=1724097337"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-Grey.jpg?v=1724097337","width":800},{"alt":null,"id":30360817336518,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-White.jpg?v=1724097337"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/PLA-WATERWASHABLERESIN-White.jpg?v=1724097337","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eCombining the advantages of eSUN’s own PLA polyol, a bio based \u003c\/span\u003e\u003cstrong\u003ewater washable resin\u003c\/strong\u003e\u003cspan\u003e for ordinary consumers contains bio based components, is compatible with color screens, black and white screens, large and small size printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-5b951ea1c460f\" data-node=\"5b951ea1c460f\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv class=\"fl-col-group fl-node-5b951ea1c4c6a\" data-node=\"5b951ea1c4c6a\"\u003e\n\u003cdiv class=\"fl-col fl-node-5b951ea1c4e58\" data-node=\"5b951ea1c4e58\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-61138bc21a557\" data-node=\"61138bc21a557\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eDescription\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col-group fl-node-63ad06c68e207\" data-node=\"63ad06c68e207\"\u003e\n\u003cdiv class=\"fl-col fl-node-63ad06c68e5a6\" data-node=\"63ad06c68e5a6\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-6335014b29f80\" data-node=\"6335014b29f80\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003ePW100 PLA Water Washable Resin has good toughness, low odor, and a smooth printed surface. It can be washed with water, eliminating alcohol cleaning steps, greatly reducing post-processing time, improving printing efficiency and cost-effective.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-row fl-row-full-width fl-row-bg-none fl-node-61138bf4047ac\" data-node=\"61138bf4047ac\"\u003e\n\u003cdiv class=\"fl-row-content-wrap\"\u003e\n\u003cdiv class=\"fl-row-content fl-row-full-width fl-node-content\"\u003e\n\u003cdiv class=\"fl-col-group fl-node-61138e649c2cc\" data-node=\"61138e649c2cc\"\u003e\n\u003cdiv class=\"fl-col fl-node-61138e649c5c9\" data-node=\"61138e649c5c9\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-heading fl-node-61138bf404a33\" data-node=\"61138bf404a33\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003ch3 class=\"fl-heading\"\u003e\u003cspan class=\"fl-heading-text\"\u003eSellingpoint\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col-group fl-node-61138bf4049b6\" data-node=\"61138bf4049b6\"\u003e\n\u003cdiv class=\"fl-col fl-node-61138bf4049f5 fl-col-small\" data-node=\"61138bf4049f5\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-61138bf404a63\" data-node=\"61138bf404a63\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eLow odor\u003c\/p\u003e\n\u003cp\u003eWashable\u003c\/p\u003e\n\u003cp\u003eWide Compatibility\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"fl-col fl-node-61138e6932316 fl-col-small\" data-node=\"61138e6932316\"\u003e\n\u003cdiv class=\"fl-col-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-module fl-module-rich-text fl-node-61138e65d1757\" data-node=\"61138e65d1757\" data-animation-delay=\"0.0\"\u003e\n\u003cdiv class=\"fl-module-content fl-node-content\"\u003e\n\u003cdiv class=\"fl-rich-text\"\u003e\n\u003cp\u003eLow Viscosity\u003c\/p\u003e\n\u003cp\u003eHigh-precision\u003c\/p\u003e\n\u003cp\u003eBalance of strength, toughness and rigidity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"detail-tag-list\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"detail-tag-item\"\u003eEducation\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"detail-tag-item\"\u003eOrnament\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003eParameter Information\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003e 3D PRINTING PHOTOPOLYMER RESIN Properties Table\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3D PRINTING PHOTOPOLYMER RESIN\u003c\/th\u003e\n\u003ctd\u003ePW100 PLA Water Washable Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity(mPa·s)\u003c\/th\u003e\n\u003ctd\u003e255-270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity(g\/cm\u003csup\u003e3\u003c\/sup\u003e)\u003c\/th\u003e\n\u003ctd\u003e1.09-1.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e45-55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at Break(%)\u003c\/th\u003e\n\u003ctd\u003e17-30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural Strength(MPa)\u003c\/th\u003e\n\u003ctd\u003e45-55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact Strength(J\/m)\u003c\/th\u003e\n\u003ctd\u003e950-1050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTearing Strength(GPa)\u003c\/th\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Distortion Temp(℃)\u003c\/th\u003e\n\u003ctd\u003e\/\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness(Shore D)\u003c\/th\u003e\n\u003ctd\u003e81\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003e\u003cspan\u003e\u003cstrong\u003eGrades (out of 10)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength（S）\u003c\/th\u003e\n\u003ctd\u003e 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eToughness（F）\u003c\/th\u003e\n\u003ctd\u003e 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForming（P）\u003c\/th\u003e\n\u003ctd\u003e 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccuracy（S）\u003c\/th\u003e\n\u003ctd\u003e 9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp\u003eSpeed （A）\u003c\/p\u003e\n\u003c\/th\u003e\n\u003ctd\u003e 7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Sb606f307c5ea4b65b21ab1e0eb2cde53I.jpg\" width=\"544\" height=\"1684\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S3b665db824be4749b8c16dda7ed54d678.jpg\" width=\"543\" height=\"1351\"\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S7ae0ca2d3ac44b77a66ee8b8bb7248e4C.jpg\" width=\"540\" height=\"1803\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S467afe9f31e2463b97b0835786799b36M.jpg\" width=\"541\" height=\"1933\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003eNotes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Shake well before printing\u003c\/p\u003e\n\u003cp\u003e2. It is not suitable to wash the resin with water for a long time. It can be cleaned for tens of seconds to one minute. After cleaning, it is better to dry it with a hair dryer in time. When storing, it should not be placed in a humid and high temperature environment\u003c\/p\u003e\n\u003cp\u003e3. The waste water after cleaning should not be discharged directly. It is better to put it in a container under the sun so that the dissolved resin can be completely solidified before discharging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"detail-tag-item\"\u003ePrint Models\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg height=\"308\" width=\"548\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3602.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3602.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg height=\"309\" width=\"549\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3603.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3603.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"detail-tag-item\"\u003e\u003cimg height=\"308\" width=\"547\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3605.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3605.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"304\" width=\"540\" src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3609.jpg\" data-mce-src=\"https:\/\/cdnus.globalso.com\/esun3d\/DSCF3609.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}