{"id":8298205151430,"title":"Spring Steel Sheet with PEI Coating Various Sizes","handle":"spring-steel-sheet-with-pei-coating-various-sizes","description":"\u003cp\u003eSpring Steel Sheets are great alternatives for 3D printing surfaces. These sheets have a 0.1mm PEI sticker (single-side) for the best first layer adheasion and easy part removal when cooled. The flexibility of spring steel sheets make it easier to remove from magnetic beds and pop prints off the PEI surface. Two alignment notches make these plates easy to place back on the bed, especially for Prusa i3 MK2.5 and MK3(S) printers.\u003c\/p\u003e\n\u003cp\u003eExcellent mount on the Prusa with the original magnetic bed. For Ender 3, CR-20 Series, it is suggested to use binder clips to hold the spring steel sheet in place.\u003c\/p\u003e\n\u003cp\u003eWe carry various sizes for these printers\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003e\u003cstrong\u003e Printer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003eEnder 3\/3s\/3pro, CR-20\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e235\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003ePrusa i3 MK3\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e241\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e254\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003eCR10, CR10S\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e310\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003eCR-X, CR10S Pro\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e320\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2024-10-30T14:06:21-04:00","created_at":"2024-08-19T15:54:01-04:00","vendor":"GENERIC","type":"Accessories","tags":["Bed","build plate","build surface","buildplate","flexible build plate","magnetic","PEI","Prusa","prusa 3d printer","removable","sheet","spring sheet","Spring Steel"],"price":1400,"price_min":1400,"price_max":2100,"available":true,"price_varies":true,"compare_at_price":2800,"compare_at_price_min":2800,"compare_at_price_max":2800,"compare_at_price_varies":false,"variants":[{"id":44031108776134,"title":"Ender 3","option1":"Ender 3","option2":null,"option3":null,"sku":"GEN-PT-BED-SPST-PEI-END3","requires_shipping":true,"taxable":true,"featured_image":{"id":37587145162950,"product_id":8298205151430,"position":1,"created_at":"2024-08-21T21:12:25-04:00","updated_at":"2024-08-21T21:12:25-04:00","alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Ender3_6eaba067-d00f-4336-84e0-0cbb1dddb7b6.jpg?v=1724289145","variant_ids":[44031108776134]},"available":true,"name":"Spring Steel Sheet with PEI Coating Various Sizes - Ender 3","public_title":"Ender 3","options":["Ender 3"],"price":1400,"weight":1500,"compare_at_price":null,"inventory_management":"shopify","barcode":"15000507","featured_media":{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511623366,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Ender3_6eaba067-d00f-4336-84e0-0cbb1dddb7b6.jpg?v=1724289145"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031108808902,"title":"Prusa i3 MK3","option1":"Prusa i3 MK3","option2":null,"option3":null,"sku":"GEN-PT-BED-SPST-PEI-PRUSA","requires_shipping":true,"taxable":true,"featured_image":{"id":37587145195718,"product_id":8298205151430,"position":2,"created_at":"2024-08-21T21:12:25-04:00","updated_at":"2024-08-21T21:12:25-04:00","alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Prusa_f7432df8-4b54-49e9-94d5-ec22734c2395.jpg?v=1724289145","variant_ids":[44031108808902]},"available":true,"name":"Spring Steel Sheet with PEI Coating Various Sizes - Prusa i3 MK3","public_title":"Prusa i3 MK3","options":["Prusa i3 MK3"],"price":2100,"weight":1500,"compare_at_price":null,"inventory_management":"shopify","barcode":"15000508","featured_media":{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511656134,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Prusa_f7432df8-4b54-49e9-94d5-ec22734c2395.jpg?v=1724289145"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031108841670,"title":"CR10\/S","option1":"CR10\/S","option2":null,"option3":null,"sku":"GEN-PT-BED-SPST-PEI-CR10","requires_shipping":true,"taxable":true,"featured_image":{"id":37587145228486,"product_id":8298205151430,"position":3,"created_at":"2024-08-21T21:12:26-04:00","updated_at":"2024-08-21T21:12:26-04:00","alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CR10_b808d12d-0e38-4030-a159-c760b7a7cbe9.jpg?v=1724289146","variant_ids":[44031108841670]},"available":true,"name":"Spring Steel Sheet with PEI Coating Various Sizes - CR10\/S","public_title":"CR10\/S","options":["CR10\/S"],"price":2100,"weight":1500,"compare_at_price":2800,"inventory_management":"shopify","barcode":"15000509","featured_media":{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511688902,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CR10_b808d12d-0e38-4030-a159-c760b7a7cbe9.jpg?v=1724289146"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":44031108874438,"title":"CR-X\/CR-10S Pro","option1":"CR-X\/CR-10S Pro","option2":null,"option3":null,"sku":"GEN-PT-BED-SPST-PEI-CRX","requires_shipping":true,"taxable":true,"featured_image":{"id":37587145261254,"product_id":8298205151430,"position":4,"created_at":"2024-08-21T21:12:26-04:00","updated_at":"2024-08-21T21:12:26-04:00","alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","width":650,"height":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CRX_11f9af6e-ba31-4078-bea0-63cc4ec8abd5.jpg?v=1724289146","variant_ids":[44031108874438]},"available":true,"name":"Spring Steel Sheet with PEI Coating Various Sizes - CR-X\/CR-10S Pro","public_title":"CR-X\/CR-10S Pro","options":["CR-X\/CR-10S Pro"],"price":2100,"weight":1500,"compare_at_price":2800,"inventory_management":"shopify","barcode":"15000510","featured_media":{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511721670,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CRX_11f9af6e-ba31-4078-bea0-63cc4ec8abd5.jpg?v=1724289146"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Ender3_6eaba067-d00f-4336-84e0-0cbb1dddb7b6.jpg?v=1724289145","\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Prusa_f7432df8-4b54-49e9-94d5-ec22734c2395.jpg?v=1724289145","\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CR10_b808d12d-0e38-4030-a159-c760b7a7cbe9.jpg?v=1724289146","\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CRX_11f9af6e-ba31-4078-bea0-63cc4ec8abd5.jpg?v=1724289146"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Ender3_6eaba067-d00f-4336-84e0-0cbb1dddb7b6.jpg?v=1724289145","options":["Size"],"media":[{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511623366,"position":1,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Ender3_6eaba067-d00f-4336-84e0-0cbb1dddb7b6.jpg?v=1724289145"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Ender3_6eaba067-d00f-4336-84e0-0cbb1dddb7b6.jpg?v=1724289145","width":650},{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511656134,"position":2,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Prusa_f7432df8-4b54-49e9-94d5-ec22734c2395.jpg?v=1724289145"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_Prusa_f7432df8-4b54-49e9-94d5-ec22734c2395.jpg?v=1724289145","width":650},{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511688902,"position":3,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CR10_b808d12d-0e38-4030-a159-c760b7a7cbe9.jpg?v=1724289146"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CR10_b808d12d-0e38-4030-a159-c760b7a7cbe9.jpg?v=1724289146","width":650},{"alt":"Spring Steel Sheet with PEI Coating Various Sizes - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":30368511721670,"position":4,"preview_image":{"aspect_ratio":1.0,"height":650,"width":650,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CRX_11f9af6e-ba31-4078-bea0-63cc4ec8abd5.jpg?v=1724289146"},"aspect_ratio":1.0,"height":650,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Spring_Steele_Sheet_CRX_11f9af6e-ba31-4078-bea0-63cc4ec8abd5.jpg?v=1724289146","width":650}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSpring Steel Sheets are great alternatives for 3D printing surfaces. These sheets have a 0.1mm PEI sticker (single-side) for the best first layer adheasion and easy part removal when cooled. The flexibility of spring steel sheets make it easier to remove from magnetic beds and pop prints off the PEI surface. Two alignment notches make these plates easy to place back on the bed, especially for Prusa i3 MK2.5 and MK3(S) printers.\u003c\/p\u003e\n\u003cp\u003eExcellent mount on the Prusa with the original magnetic bed. For Ender 3, CR-20 Series, it is suggested to use binder clips to hold the spring steel sheet in place.\u003c\/p\u003e\n\u003cp\u003eWe carry various sizes for these printers\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003e\u003cstrong\u003e Printer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003eEnder 3\/3s\/3pro, CR-20\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e235\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003ePrusa i3 MK3\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e241\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e254\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003eCR10, CR10S\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e310\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 36%;\"\u003eCR-X, CR10S Pro\u003c\/td\u003e\n\u003ctd style=\"width: 20.5742%;\"\u003e320\u003c\/td\u003e\n\u003ctd style=\"width: 37.4258%;\"\u003e310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
Spring Steel Sheet with PEI Coating Various Sizes
Related Products
3DLAC Adhesive Stick - 80ml
$14.00 USD
{"id":8298238083270,"title":"3DLAC Adhesive Stick - 80ml","handle":"3dlac-adhesive-stick-80ml","description":"\u003ch1 data-mce-fragment=\"1\"\u003e3DLAC STICK prevent warping and help to achieve 3D printed parts of excellent quality.\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis new format has an applicator that facilitates the use of the product and allows to distribute the adhesive in a precise and uniform way over printing base.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo use this product you only need to press the applicator against the printing surface for a couple of seconds and once the adhesive flows, it spreads a light layer of product over the printing area. Once it has evaporated you can start printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"3dlac adhesive stick\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/3DLAC_6_480x480.jpg?v=1702931633\"\u003e\u003c\/p\u003e","published_at":"2024-10-30T15:37:07-04:00","created_at":"2024-08-19T15:56:35-04:00","vendor":"3DLAC","type":"3D Printer Accessories","tags":["3D printer","3DLAC","accessories","Adhesive","adhesive glue","adhesive stick","Digitmakers.ca","Glue","Shopify Collective"],"price":1400,"price_min":1400,"price_max":1400,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031176114374,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3DLAC-ADH-STICK-80ML","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC Adhesive Stick - 80ml","public_title":null,"options":["Default Title"],"price":1400,"weight":1000,"compare_at_price":0,"inventory_management":"shopify","barcode":"8411322245048","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/3DLAC_6.png?v=1724097398"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/3DLAC_6.png?v=1724097398","options":["Title"],"media":[{"alt":null,"id":30360853250246,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/3DLAC_6.png?v=1724097398"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/3DLAC_6.png?v=1724097398","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 data-mce-fragment=\"1\"\u003e3DLAC STICK prevent warping and help to achieve 3D printed parts of excellent quality.\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis new format has an applicator that facilitates the use of the product and allows to distribute the adhesive in a precise and uniform way over printing base.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo use this product you only need to press the applicator against the printing surface for a couple of seconds and once the adhesive flows, it spreads a light layer of product over the printing area. Once it has evaporated you can start printing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"3dlac adhesive stick\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/3DLAC_6_480x480.jpg?v=1702931633\"\u003e\u003c\/p\u003e"}
3DLAC Adhesive Stick - 80ml
$14.00
3DLAC STICK prevent warping and help to achieve 3D printed parts of excellent quality. This new format has an applicator that facilitates the use of the product and allows to distribute the adhesive in a precise and uniform way over printing base. To use this product you only need to press the applicator against the printing surface for a couple...
3DLAC Plus Adhesive Spray - 100ml
$14.00 USD
{"id":8298238214342,"title":"3DLAC Plus Adhesive Spray - 100ml","handle":"3dlac-plus-adhesive-spray-100ml","description":"\u003ch1 style=\"text-align: center;\"\u003e3DLAC Plus 3D Printer Adhesive vapor spray\u003c\/h1\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003e-the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping of the prints and helps avoid other similar defects. The vapor spray format allows you to take our 3DLAC PLUS vapor spray everywhere.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003eA light 3DLAC Plus 3D Printing adhesive mist over the surface is enough to completely adhere the first layer of plastic to the build plate surface. Thanks to the properties of 3DLAC Plus vapor spray, while the base is hot the extruded plastic is firmly adhered. Once the printed part cools, the 3DLAC Plus adhesive releases and the print can be taken off smoothly and without damage.\u003c\/p\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003e\u003cimg alt=\"3DLAC plus adhesive spray\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/3dlac_480x480.jpg?v=1702928611\"\u003e\u003c\/p\u003e","published_at":"2024-10-30T16:48:28-04:00","created_at":"2024-08-19T15:56:36-04:00","vendor":"3DLAC","type":"3D Printer Accessories","tags":["3D printer","3DLAC","accessories","Adhesive","ADHESIVE SPRAY","Digitmakers.ca","Glue","Shopify Collective"],"price":1400,"price_min":1400,"price_max":1400,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031176605894,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3DLAC-PLUS-ADH-SPRY-100ML","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3DLAC Plus Adhesive Spray - 100ml","public_title":null,"options":["Default Title"],"price":1400,"weight":1000,"compare_at_price":0,"inventory_management":"shopify","barcode":"8411322240500","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/U6f8eeda993de48e7b96cde3713afac36Z.jpg?v=1724097398"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/U6f8eeda993de48e7b96cde3713afac36Z.jpg?v=1724097398","options":["Title"],"media":[{"alt":null,"id":30360853774534,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/U6f8eeda993de48e7b96cde3713afac36Z.jpg?v=1724097398"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/U6f8eeda993de48e7b96cde3713afac36Z.jpg?v=1724097398","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 style=\"text-align: center;\"\u003e3DLAC Plus 3D Printer Adhesive vapor spray\u003c\/h1\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003e-the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping of the prints and helps avoid other similar defects. The vapor spray format allows you to take our 3DLAC PLUS vapor spray everywhere.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003eA light 3DLAC Plus 3D Printing adhesive mist over the surface is enough to completely adhere the first layer of plastic to the build plate surface. Thanks to the properties of 3DLAC Plus vapor spray, while the base is hot the extruded plastic is firmly adhered. Once the printed part cools, the 3DLAC Plus adhesive releases and the print can be taken off smoothly and without damage.\u003c\/p\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-empty=\"true\" data-mce-fragment=\"1\"\u003e\u003cimg alt=\"3DLAC plus adhesive spray\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/3dlac_480x480.jpg?v=1702928611\"\u003e\u003c\/p\u003e"}
3DLAC Plus Adhesive Spray - 100ml
$14.00
3DLAC Plus 3D Printer Adhesive vapor spray -the perfect substitute for Kapton tape, blue tape and other types of adhesives. It is cost efficient and easy to apply. 3DLAC ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. It also prevents warping o...
{"id":8298229334214,"title":"Bambu Lab Liquid Glue for Build Plate ( PLA\/ABS\/PETG )","handle":"bambu-lab-liquid-glue-for-build-plate-pla-abs-petg","description":"\u003ch3 class=\"pct_st\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eX1 and P1 Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eFeatures \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with glue stick, liquid glue for build plate will leave less residue on the printed model and is easier to clean up.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompared with glue stick, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eRecommended Settings\u003c\/h3\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotbed Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePLA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e40~60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eABS\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e90~100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePETG\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e60~80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePET\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80~100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTPU\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e30~45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eASA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e90~100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eInstructions\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eApply pressure to the applicator head to open the internal valve; then, spread glue evenly over the print area. After printing, simply clean the build plate and the bottom of the model with water.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eCaution \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for filaments such as PLA, PETG, PET, ABS, ASA, TPU.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo ensure maximum effect, multiple glue applications are not recommended.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not squeeze the bottle too hard.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf the adhesion to some filament is not enough, please increase the temperature of the hotbed appropriately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eWorking Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e100 times（coat the full plate）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e60 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e30*30*139.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tb\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"pct_st\"\u003e\u003c\/h3\u003e","published_at":"2024-11-05T13:05:44-05:00","created_at":"2024-08-19T15:55:47-04:00","vendor":"Bambu Lab","type":"Accessories","tags":["accessories","Adhesive","adhesive for build plate","Bambu Lab","bambu lab accessories","bambu lab glue","Glue","liquid glue","New","New Arrival","new-arrivals","x1 and p1 series"],"price":1900,"price_min":1900,"price_max":1900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031156814022,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LGL001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bambu Lab Liquid Glue for Build Plate ( PLA\/ABS\/PETG )","public_title":null,"options":["Default Title"],"price":1900,"weight":500,"compare_at_price":null,"inventory_management":"shopify","barcode":"921063010130","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/Bambu-Lab-Liquid-Glue-for-Build-Plate-PLA-ABS-PETG-Digitmakers-ca-4761_0b796f1e-793d-4477-84d2-6de7e91126cb.png?v=1724283081"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/Bambu-Lab-Liquid-Glue-for-Build-Plate-PLA-ABS-PETG-Digitmakers-ca-4761_0b796f1e-793d-4477-84d2-6de7e91126cb.png?v=1724283081","options":["Title"],"media":[{"alt":"Bambu Lab Liquid Glue for Build Plate ( PLA\/ABS\/PETG ) Digitmakers.ca","id":30368190595270,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/Bambu-Lab-Liquid-Glue-for-Build-Plate-PLA-ABS-PETG-Digitmakers-ca-4761_0b796f1e-793d-4477-84d2-6de7e91126cb.png?v=1724283081"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/Bambu-Lab-Liquid-Glue-for-Build-Plate-PLA-ABS-PETG-Digitmakers-ca-4761_0b796f1e-793d-4477-84d2-6de7e91126cb.png?v=1724283081","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch3 class=\"pct_st\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eX1 and P1 Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eFeatures \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with glue stick, liquid glue for build plate will leave less residue on the printed model and is easier to clean up.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompared with glue stick, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eRecommended Settings\u003c\/h3\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eHotbed Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePLA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e40~60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eABS\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e90~100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePETG\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e60~80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003ePET\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80~100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eTPU\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e30~45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eASA\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e90~100°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eInstructions\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eApply pressure to the applicator head to open the internal valve; then, spread glue evenly over the print area. After printing, simply clean the build plate and the bottom of the model with water.\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eCaution \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for filaments such as PLA, PETG, PET, ABS, ASA, TPU.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo ensure maximum effect, multiple glue applications are not recommended.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDo not squeeze the bottle too hard.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf the adhesion to some filament is not enough, please increase the temperature of the hotbed appropriately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"pct_st\"\u003eProduct Specification\u003c\/h3\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eWorking Life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e100 times（coat the full plate）\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e60 mL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e80 g\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackage size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e30*30*139.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tb\"\u003e\n\u003cdiv class=\"TableWrapper\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"pct_st\"\u003e\u003c\/h3\u003e"}
Bambu Lab Liquid Glue for Build Plate ( PLA/ABS/PETG )
$19.00
Compatibility X1 and P1 Series The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worryi...
BuildTak - 165 mm x 254 mm (6.5" x 10.0")
$11.00 USD
{"id":8298238542022,"title":"BuildTak - 165 mm x 254 mm (6.5\" x 10.0\")","handle":"buildtak-165-mm-x-254-mm-6-5-x-10-0","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-11-05T13:10:12-05:00","created_at":"2024-08-19T15:56:37-04:00","vendor":"BuildTak","type":"Parts","tags":["accessories","adhesive sheet","build plate","BuildTak"],"price":1100,"price_min":1100,"price_max":1100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031177457862,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BLTK-SRFC-6.5X10-IN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BuildTak - 165 mm x 254 mm (6.5\" x 10.0\")","public_title":null,"options":["Default Title"],"price":1100,"weight":1000,"compare_at_price":null,"inventory_management":"shopify","barcode":"10001046","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_909d8561-5be6-446f-ac27-6d8cda94a442.jpg?v=1724291744"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_909d8561-5be6-446f-ac27-6d8cda94a442.jpg?v=1724291744","options":["Title"],"media":[{"alt":"BuildTak - 165 mm x 254 mm (6.5\" x 10.0\") - Digitmakers.ca","id":30368689979590,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_909d8561-5be6-446f-ac27-6d8cda94a442.jpg?v=1724291744"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_909d8561-5be6-446f-ac27-6d8cda94a442.jpg?v=1724291744","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}
BuildTak - 165 mm x 254 mm (6.5" x 10.0")
$11.00
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
Sale
BuildTak - 203 mm x 203 mm (8.0" x 8.0")
$10.00 USD $11.00
{"id":8298236608710,"title":"BuildTak - 203 mm x 203 mm (8.0\" x 8.0\")","handle":"buildtak-203-mm-x-203-mm-8-0-x-8-0","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-10-30T15:45:23-04:00","created_at":"2024-08-19T15:56:30-04:00","vendor":"BuildTak","type":"Parts","tags":["accessories","adhesive sheet","build plate","BuildTak"],"price":1000,"price_min":1000,"price_max":1000,"available":true,"price_varies":false,"compare_at_price":1100,"compare_at_price_min":1100,"compare_at_price_max":1100,"compare_at_price_varies":false,"variants":[{"id":44031173132486,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BLTK-SRFC-8X8-IN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BuildTak - 203 mm x 203 mm (8.0\" x 8.0\")","public_title":null,"options":["Default Title"],"price":1000,"weight":200,"compare_at_price":1100,"inventory_management":"shopify","barcode":"10001045","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_d6951b69-6ce4-40e2-8355-f2f27d65664f.jpg?v=1724291742"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_d6951b69-6ce4-40e2-8355-f2f27d65664f.jpg?v=1724291742","options":["Title"],"media":[{"alt":"BuildTak - 203 mm x 203 mm (8.0\" x 8.0\") - Digitmakers.ca","id":30368689684678,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_d6951b69-6ce4-40e2-8355-f2f27d65664f.jpg?v=1724291742"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_d6951b69-6ce4-40e2-8355-f2f27d65664f.jpg?v=1724291742","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}
BuildTak - 203 mm x 203 mm (8.0" x 8.0")
$10.00
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
BuildTak - 254 mm x 254 mm (10.0" x 10.0")
$15.00 USD
{"id":8298232185030,"title":"BuildTak - 254 mm x 254 mm (10.0\" x 10.0\")","handle":"buildtak-254-mm-x-254-mm-10-0-x-10-0","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-11-05T13:02:55-05:00","created_at":"2024-08-19T15:56:02-04:00","vendor":"BuildTak","type":"Parts","tags":["accessories","adhesive sheet","build plate","BuildTak"],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031163498694,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BLTK-SRFC-10X10-IN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BuildTak - 254 mm x 254 mm (10.0\" x 10.0\")","public_title":null,"options":["Default Title"],"price":1500,"weight":400,"compare_at_price":null,"inventory_management":"shopify","barcode":"10001043","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_34f8319e-f3df-480d-8bf1-939011ecce7d.jpg?v=1724291735"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_34f8319e-f3df-480d-8bf1-939011ecce7d.jpg?v=1724291735","options":["Title"],"media":[{"alt":"BuildTak - 254 mm x 254 mm (10.0\" x 10.0\") - Digitmakers.ca","id":30368689160390,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_34f8319e-f3df-480d-8bf1-939011ecce7d.jpg?v=1724291735"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_34f8319e-f3df-480d-8bf1-939011ecce7d.jpg?v=1724291735","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}
BuildTak - 254 mm x 254 mm (10.0" x 10.0")
$15.00
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
BuildTak - 406 mm x 406 mm (16.0" x 16.0")
$38.00 USD
{"id":8298238116038,"title":"BuildTak - 406 mm x 406 mm (16.0\" x 16.0\")","handle":"buildtak-406-mm-x-406-mm-16-0-x-16-0","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2024-10-30T16:44:33-04:00","created_at":"2024-08-19T15:56:35-04:00","vendor":"BuildTak","type":"Parts","tags":["3D printer","accessories","adhesive sheet","build plate","BuildTak"],"price":3800,"price_min":3800,"price_max":3800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031176147142,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BLTK-SRFC-16X16-IN","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BuildTak - 406 mm x 406 mm (16.0\" x 16.0\")","public_title":null,"options":["Default Title"],"price":3800,"weight":1500,"compare_at_price":null,"inventory_management":"shopify","barcode":"10001041","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_967f50bd-28a7-4bfa-b7b2-2b51258fed32.jpg?v=1724291723"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_967f50bd-28a7-4bfa-b7b2-2b51258fed32.jpg?v=1724291723","options":["Title"],"media":[{"alt":"BuildTak - 406 mm x 406 mm (16.0\" x 16.0\") - Digitmakers.ca","id":30368688439494,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_967f50bd-28a7-4bfa-b7b2-2b51258fed32.jpg?v=1724291723"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/BuildTak_967f50bd-28a7-4bfa-b7b2-2b51258fed32.jpg?v=1724291723","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal build surface for FFF 3D printers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eWorks with ABS, PLA, HIPS, PET+, Brick, Wood \u0026amp; Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstalls much easier than masking tape or films typically used and with fewer chances of air bubbles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtects build plate\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCreates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}
BuildTak - 406 mm x 406 mm (16.0" x 16.0")
$38.00
Ideal build surface for FFF 3D printers. Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typica...
Sale
CRAFTBOT 2 / PLUS / PRO KAPTON CBP SHEET
$7.00 USD $11.00
{"id":8298216521926,"title":"CRAFTBOT 2 \/ PLUS \/ PRO KAPTON CBP SHEET","handle":"craftbot-2-plus-pro-kapton-cbp-sheet","description":"\u003cdiv class=\"grid\" itemtype=\"http:\/\/schema.org\/Product\" itemscope=\"\"\u003e\n\u003cdiv class=\"grid-item large--three-fifths\"\u003e\n\u003cdiv class=\"product-description rte\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cspan\u003eThick and durable kapton sheets for CraftBot and CraftBot PLUS and CraftBot Pro 3D printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-11-05T13:02:52-05:00","created_at":"2024-08-19T15:54:51-04:00","vendor":"Craftbot","type":"Parts","tags":["3D parts","build plate","Craftbot","craftbot 3","Craftbot cbp","Craftbot kapton","craftbot parts","Craftbot plus","flexible build plate","New","New Arrival","new-arrivals","parts","spare part"],"price":700,"price_min":700,"price_max":700,"available":true,"price_varies":false,"compare_at_price":1100,"compare_at_price_min":1100,"compare_at_price_max":1100,"compare_at_price_varies":false,"variants":[{"id":44031133384902,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"pr.001.055","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CRAFTBOT 2 \/ PLUS \/ PRO KAPTON CBP SHEET","public_title":null,"options":["Default Title"],"price":700,"weight":100,"compare_at_price":1100,"inventory_management":"shopify","barcode":"5999566800092","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_63567062-f5ac-4ae1-84a9-634d268dd634.jpg?v=1724284232"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_63567062-f5ac-4ae1-84a9-634d268dd634.jpg?v=1724284232","options":["Title"],"media":[{"alt":"CRAFTBOT 2 \/ PLUS \/ PRO KAPTON CBP SHEET - Digitmakers.ca","id":30368257802438,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_63567062-f5ac-4ae1-84a9-634d268dd634.jpg?v=1724284232"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_63567062-f5ac-4ae1-84a9-634d268dd634.jpg?v=1724284232","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"grid\" itemtype=\"http:\/\/schema.org\/Product\" itemscope=\"\"\u003e\n\u003cdiv class=\"grid-item large--three-fifths\"\u003e\n\u003cdiv class=\"product-description rte\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cspan\u003eThick and durable kapton sheets for CraftBot and CraftBot PLUS and CraftBot Pro 3D printers.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
CRAFTBOT 2 / PLUS / PRO KAPTON CBP SHEET
$7.00
Thick and durable kapton sheets for CraftBot and CraftBot PLUS and CraftBot Pro 3D printers.
Sale
CRAFTBOT FLOW / FLOW XL KAPTON SHEET
$18.00 USD $42.00
{"id":8298234937542,"title":"CRAFTBOT FLOW \/ FLOW XL KAPTON SHEET","handle":"craftbot-flow-flow-xl-kapton-sheet","description":"\u003cdiv class=\"grid\" itemtype=\"http:\/\/schema.org\/Product\" itemscope=\"\"\u003e\n\u003cdiv class=\"grid-item large--three-fifths\"\u003e\n\u003cdiv class=\"product-description rte\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cspan\u003eThick and durable kapton sheets for CraftBot Flow and Flow XL printers, pack of 3. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2024-10-30T16:46:47-04:00","created_at":"2024-08-19T15:56:07-04:00","vendor":"Craftbot","type":"Parts","tags":["3D parts","build plate","Craftbot","craftbot 3","craftbot flow","Craftbot flow generation","craftbot flow xl","Craftbot kapton","craftbot parts","flexible build plate","New","New Arrival","new-arrivals","parts","spare part"],"price":1800,"price_min":1800,"price_max":1800,"available":true,"price_varies":false,"compare_at_price":4200,"compare_at_price_min":4200,"compare_at_price_max":4200,"compare_at_price_varies":false,"variants":[{"id":44031169364166,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CB4S-AS-043","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CRAFTBOT FLOW \/ FLOW XL KAPTON SHEET","public_title":null,"options":["Default Title"],"price":1800,"weight":100,"compare_at_price":4200,"inventory_management":"shopify","barcode":"5999566803604","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_3d2a84c5-c060-46de-ae6c-df9edc3e5216.jpg?v=1724284235"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_3d2a84c5-c060-46de-ae6c-df9edc3e5216.jpg?v=1724284235","options":["Title"],"media":[{"alt":"CRAFTBOT FLOW \/ FLOW XL KAPTON SHEET - Digitmakers.ca","id":30368257835206,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_3d2a84c5-c060-46de-ae6c-df9edc3e5216.jpg?v=1724284235"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/cd5580eebbbfd7b57febe41c78760676_3d2a84c5-c060-46de-ae6c-df9edc3e5216.jpg?v=1724284235","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv class=\"grid\" itemtype=\"http:\/\/schema.org\/Product\" itemscope=\"\"\u003e\n\u003cdiv class=\"grid-item large--three-fifths\"\u003e\n\u003cdiv class=\"product-description rte\" itemprop=\"description\"\u003e\n\u003cp\u003e\u003cspan\u003eThick and durable kapton sheets for CraftBot Flow and Flow XL printers, pack of 3. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
CRAFTBOT FLOW / FLOW XL KAPTON SHEET
$18.00
Thick and durable kapton sheets for CraftBot Flow and Flow XL printers, pack of 3.
Sale
Flashforge Creator 3 Heater Board V0.5
$11.00 USD $28.00
{"id":8298213146822,"title":"Flashforge Creator 3 Heater Board V0.5","handle":"flashforge-creator-3-heater-board-v0-5","description":"\u003cp\u003e\u003cspan\u003eHeated bed board including cable for the Flashforge Creator 3 3D printer.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-11-05T13:08:00-05:00","created_at":"2024-08-19T15:54:39-04:00","vendor":"Flashforge","type":"Parts","tags":["adhesive","electrical","ff0039","Flashforge","flashforge spare parts","heater board v0.5","insulation"],"price":1100,"price_min":1100,"price_max":1100,"available":true,"price_varies":false,"compare_at_price":2800,"compare_at_price_min":2800,"compare_at_price_max":2800,"compare_at_price_varies":false,"variants":[{"id":44031127224518,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FF-PT-HBRD-V0.5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flashforge Creator 3 Heater Board V0.5","public_title":null,"options":["Default Title"],"price":1100,"weight":1000,"compare_at_price":2800,"inventory_management":"shopify","barcode":"77923046","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/flashforge-creator-3-heater-board_dc54228e-deb1-4f52-b8e4-59e7e8c3caba.png?v=1724285130","\/\/digitmakers.com\/cdn\/shop\/files\/flashforge-creator-3-heater-board-2_aa098459-86a0-4b97-ad9e-b4e6f8efd5b3.png?v=1724285130"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/flashforge-creator-3-heater-board_dc54228e-deb1-4f52-b8e4-59e7e8c3caba.png?v=1724285130","options":["Title"],"media":[{"alt":"Flashforge Creator 3 Heater Board V0.5 - Digitmakers.ca","id":30368311050438,"position":1,"preview_image":{"aspect_ratio":1.773,"height":282,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/flashforge-creator-3-heater-board_dc54228e-deb1-4f52-b8e4-59e7e8c3caba.png?v=1724285130"},"aspect_ratio":1.773,"height":282,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/flashforge-creator-3-heater-board_dc54228e-deb1-4f52-b8e4-59e7e8c3caba.png?v=1724285130","width":500},{"alt":"Flashforge Creator 3 Heater Board V0.5 - Digitmakers.ca","id":30368311083206,"position":2,"preview_image":{"aspect_ratio":1.779,"height":281,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/flashforge-creator-3-heater-board-2_aa098459-86a0-4b97-ad9e-b4e6f8efd5b3.png?v=1724285130"},"aspect_ratio":1.779,"height":281,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/flashforge-creator-3-heater-board-2_aa098459-86a0-4b97-ad9e-b4e6f8efd5b3.png?v=1724285130","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eHeated bed board including cable for the Flashforge Creator 3 3D printer.\u003c\/span\u003e\u003c\/p\u003e"}
Flashforge Creator 3 Heater Board V0.5
$11.00
Heated bed board including cable for the Flashforge Creator 3 3D printer.
Magigoo Pro HT (High Temperature)
$42.00 USD
{"id":8298223272134,"title":"Magigoo Pro HT (High Temperature)","handle":"magigoo-pro-ht-high-temperature","description":"\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003eMAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhy Magigoo Pro HT? \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHigh temperature materials such as PEEK are advanced engineering thermoplastics which offer improved mechanical and chemical stability at elevated temperatures when compared to regular thermoplastics. Other materials include PEKK, Ultem and PPSU and their carbon\/glass fibre reinforced counterparts. Owing to their high temperature and other exceptional properties these materials are highly sought after in high temperature and high performance engineering applications such as in the automotive and aerospace industries. Additionally these material are also sought after in the chemical, petrochemical, medical and research applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHigh temperature filaments prove to be challenging materials for FDM printing due to their higher tendency to warp. These materials are generally printed at elevated temperatures owing to their high temperature properties. MAGIGOO HT is a specialized solution for FDM printing of PEEK filaments which was developed to work at elevated printing temperatures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHOW: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMAGIGOO HT has been designed and tested to work with build-plate temperature of 150 °C or lower. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eShake\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e the bottle.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eApply\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003ePrint\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e according to the filament\/printer manufacturers recommendations\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eAllow to cool and remove\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The print should pop right off\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eClean\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e - Use a damp cloth to wipe off. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSAFETY:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUsing this product with other than PEEK filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for best results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTips:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor larger prints a 20 mm brim is recommended\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo HT was designed for glass surface but also works on high temperature garolite and other build-surfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo Pro HT \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Designed_TDS_Magigoo_HT_v1.0.pdf?v=1658785413\" title=\"TDS\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eMagigoo Pro HT \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Magigoo_Original_PA_PC_HT_Flex_Metal_English_2020_3.pdf?v=1658785412\" title=\"MSDS\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2024-11-05T13:02:53-05:00","created_at":"2024-08-19T15:55:20-04:00","vendor":"Magigoo","type":"Accessories","tags":["accessories","Adhesive","Glue","High temperature","lube","magigoo","pro ht"],"price":4200,"price_min":4200,"price_max":4200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031146033350,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MGG-PT-GLU-HT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magigoo Pro HT (High Temperature)","public_title":null,"options":["Default Title"],"price":4200,"weight":500,"compare_at_price":null,"inventory_management":"shopify","barcode":"5350583999990","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTNR_7122f35f-3ed8-4329-bf00-336ee6a7759e.png?v=1724284887","\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTandCap2_38521630-4501-49bd-b63d-a081c0740520.png?v=1724284887","\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTOpenInstructions_D_6676996d-0f5e-4eb7-a3bd-bad01ba7c546.png?v=1724284887"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTNR_7122f35f-3ed8-4329-bf00-336ee6a7759e.png?v=1724284887","options":["Title"],"media":[{"alt":"Magigoo Pro HT (High Temperature) - Digitmakers.ca","id":30368301187270,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTNR_7122f35f-3ed8-4329-bf00-336ee6a7759e.png?v=1724284887"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTNR_7122f35f-3ed8-4329-bf00-336ee6a7759e.png?v=1724284887","width":500},{"alt":"Magigoo Pro HT (High Temperature) - Digitmakers.ca","id":30368301220038,"position":2,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTandCap2_38521630-4501-49bd-b63d-a081c0740520.png?v=1724284887"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTandCap2_38521630-4501-49bd-b63d-a081c0740520.png?v=1724284887","width":500},{"alt":"Magigoo Pro HT (High Temperature) - Digitmakers.ca","id":30368301252806,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTOpenInstructions_D_6676996d-0f5e-4eb7-a3bd-bad01ba7c546.png?v=1724284887"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooHTOpenInstructions_D_6676996d-0f5e-4eb7-a3bd-bad01ba7c546.png?v=1724284887","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003eMAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhy Magigoo Pro HT? \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHigh temperature materials such as PEEK are advanced engineering thermoplastics which offer improved mechanical and chemical stability at elevated temperatures when compared to regular thermoplastics. Other materials include PEKK, Ultem and PPSU and their carbon\/glass fibre reinforced counterparts. Owing to their high temperature and other exceptional properties these materials are highly sought after in high temperature and high performance engineering applications such as in the automotive and aerospace industries. Additionally these material are also sought after in the chemical, petrochemical, medical and research applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHigh temperature filaments prove to be challenging materials for FDM printing due to their higher tendency to warp. These materials are generally printed at elevated temperatures owing to their high temperature properties. MAGIGOO HT is a specialized solution for FDM printing of PEEK filaments which was developed to work at elevated printing temperatures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHOW: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMAGIGOO HT has been designed and tested to work with build-plate temperature of 150 °C or lower. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eShake\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e the bottle.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eApply\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003ePrint\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e according to the filament\/printer manufacturers recommendations\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eAllow to cool and remove\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The print should pop right off\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eClean\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e - Use a damp cloth to wipe off. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSAFETY:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUsing this product with other than PEEK filaments might cause over adhesion and damage your build surface. Follow the instructions found in the technical data sheet for best results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTips:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor larger prints a 20 mm brim is recommended\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo HT was designed for glass surface but also works on high temperature garolite and other build-surfaces\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo Pro HT \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Designed_TDS_Magigoo_HT_v1.0.pdf?v=1658785413\" title=\"TDS\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cspan\u003eMagigoo Pro HT \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Magigoo_Original_PA_PC_HT_Flex_Metal_English_2020_3.pdf?v=1658785412\" title=\"MSDS\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
Magigoo Pro HT (High Temperature)
$42.00
MAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. Why Magigoo Pro HT? High temperature materials such as PEEK are advanced engineering thermoplastics which offer improved mechanical and chemical st...
Magigoo Pro PC (Polycarbonate)
$21.00 USD
{"id":8298223304902,"title":"Magigoo Pro PC (Polycarbonate)","handle":"magigoo-pro-pc-polycarbonate","description":"\u003cp\u003eMAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhy Magigoo Pro PC? \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe strength and toughness of PC make it an ideal FDM material for the production of functional prototypes as well as end use part, nonetheless the material does present some printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be used in high temperature applications. However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped to cater for the high printing temperatures required to print virgin PC. Virgin PC in fact tends to warp considerably when printed at an insufficient bed temperature (\u0026lt;130 ºC), in non-heated enclosed chambers without the use of an appropriate bed adhesive. Certain manufacturers have improved the printability of PC by the use of plasticizers or blending with other materials. Nonetheless when using these solutions some difficulties are still encountered, firstly with adhesion especially on larger parts still can be an issue. In addition to this some bed adhesion sheets have been proposed to avoid the warp encountered in larger prints, but in this case there is a high tendency that the adhesion sheet being used fuses irreversibly to the print. This means that the expensive sheet needs to be removed very often and also incurs a lot of post processing and cleaning. Magigoo PC can be used on glass or multiple other surfaces. Use on other plastic based surfaces, including sheets is recommended to provide strong adhesion and preventing the part to fuse to the sheet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHOW:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMAGIGOO PC has been designed and tested to work with different PC filament brands. As the composition of each plastic is a little different, the ideal settings for MAGIGOO PC may vary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eShake\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e the bottle.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eApply\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003ePrint\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e according to the filament\/printer manufacturers recommendations\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eAllow to cool and Remove\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The print should pop right off\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eClean\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e - Use a damp cloth to wipe off. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSAFETY\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUsing this product with other than PC type filaments might cause over adhesion and damage your build surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTips:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor larger prints a 20 mm brim with multiple layers is recommended\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIn cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo Pro PC \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Designed_TDS_PC_v1.5.pdf?v=1658783472\" title=\"TDS\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo Pro PC \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Magigoo_Original_PA_PC_HT_Flex_Metal_English_2020_2.pdf?v=1658783472\" title=\"msds\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2024-11-05T13:10:08-05:00","created_at":"2024-08-19T15:55:20-04:00","vendor":"Magigoo","type":"Accessories","tags":["accessories","Adhesive","Glue","lube","magigoo","polycarbonate","pro pc"],"price":2100,"price_min":2100,"price_max":2100,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":44031146098886,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MGG-PT-GLU-PC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Magigoo Pro PC (Polycarbonate)","public_title":null,"options":["Default Title"],"price":2100,"weight":500,"compare_at_price":null,"inventory_management":"shopify","barcode":"5350583999945","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPC_0baa42ab-4e53-45a4-9118-9ae2018a7210.png?v=1724284912","\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPCandBox1-WITHOUT_5aa8aa0b-5a0b-4b31-9220-ef2e854c0927.png?v=1724284912","\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPCOpenInstructionsWITHOUT_914bcae5-318a-4f55-aa42-76b2fd980840.png?v=1724284912"],"featured_image":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPC_0baa42ab-4e53-45a4-9118-9ae2018a7210.png?v=1724284912","options":["Title"],"media":[{"alt":"Magigoo Pro PC (Polycarbonate) - Digitmakers.ca","id":30368302268614,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPC_0baa42ab-4e53-45a4-9118-9ae2018a7210.png?v=1724284912"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPC_0baa42ab-4e53-45a4-9118-9ae2018a7210.png?v=1724284912","width":500},{"alt":"Magigoo Pro PC (Polycarbonate) - Digitmakers.ca","id":30368302301382,"position":2,"preview_image":{"aspect_ratio":0.998,"height":501,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPCandBox1-WITHOUT_5aa8aa0b-5a0b-4b31-9220-ef2e854c0927.png?v=1724284912"},"aspect_ratio":0.998,"height":501,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPCandBox1-WITHOUT_5aa8aa0b-5a0b-4b31-9220-ef2e854c0927.png?v=1724284912","width":500},{"alt":"Magigoo Pro PC (Polycarbonate) - Digitmakers.ca","id":30368302334150,"position":3,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPCOpenInstructionsWITHOUT_914bcae5-318a-4f55-aa42-76b2fd980840.png?v=1724284912"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/digitmakers.com\/cdn\/shop\/files\/MagigooPCOpenInstructionsWITHOUT_914bcae5-318a-4f55-aa42-76b2fd980840.png?v=1724284912","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhy Magigoo Pro PC? \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe strength and toughness of PC make it an ideal FDM material for the production of functional prototypes as well as end use part, nonetheless the material does present some printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be used in high temperature applications. However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped to cater for the high printing temperatures required to print virgin PC. Virgin PC in fact tends to warp considerably when printed at an insufficient bed temperature (\u0026lt;130 ºC), in non-heated enclosed chambers without the use of an appropriate bed adhesive. Certain manufacturers have improved the printability of PC by the use of plasticizers or blending with other materials. Nonetheless when using these solutions some difficulties are still encountered, firstly with adhesion especially on larger parts still can be an issue. In addition to this some bed adhesion sheets have been proposed to avoid the warp encountered in larger prints, but in this case there is a high tendency that the adhesion sheet being used fuses irreversibly to the print. This means that the expensive sheet needs to be removed very often and also incurs a lot of post processing and cleaning. Magigoo PC can be used on glass or multiple other surfaces. Use on other plastic based surfaces, including sheets is recommended to provide strong adhesion and preventing the part to fuse to the sheet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHOW:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMAGIGOO PC has been designed and tested to work with different PC filament brands. As the composition of each plastic is a little different, the ideal settings for MAGIGOO PC may vary.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eShake\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e the bottle.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eApply\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003ePrint\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e according to the filament\/printer manufacturers recommendations\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eAllow to cool and Remove\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e. The print should pop right off\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cp\u003e\u003cb\u003eClean\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e - Use a damp cloth to wipe off. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSAFETY\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eUsing this product with other than PC type filaments might cause over adhesion and damage your build surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTips:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor larger prints a 20 mm brim with multiple layers is recommended\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIn cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo Pro PC \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Designed_TDS_PC_v1.5.pdf?v=1658783472\" title=\"TDS\" target=\"_blank\"\u003eTDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eMagigoo Pro PC \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/Magigoo_Original_PA_PC_HT_Flex_Metal_English_2020_2.pdf?v=1658783472\" title=\"msds\" target=\"_blank\"\u003eMSDS\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
Magigoo Pro PC (Polycarbonate)
$21.00
MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the ...
